Add to Cart
Low power consumption/heat dispersion
Broadcom chip in build Copper RJ-45 SFP+ CAT6a/CAT7 Transceiver Module 80m
10G T to 10G T, 10G T to 5G T, 10G T to 2.5G T, 10G T to 1000M T SFP+
Description
Gigaopto`s GTS-T0096-08 Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the 10G Ethernet and 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE802.3az, which supports 10Gbps data- rate link up to 80 meters over un-shielded twisted-pair category 6a/7cables. This 10GBASE-T solution offers versatility and a cost-effective alternative to fiber.
The copper module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol.
Each SFP+ copper transceiver module is individually tested to be used on a series of switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, this easy to install, hot swappable 10G SFP+ transceiver is ideal for enterprise networking for LAN applications and other diverse networking places using copper connections.
Functional Specification
Form Type | SFP+ | Max Data Rate | 10.31Gb/s |
Chip in build | Broadcom | Reach | 80 meters |
Connector | RJ-45 | Cable Type | Cat.6a/Cat.7 copper |
Power Consumption | ≤2.5W | Digital Diagnostic | Not Supported |
EMC (Electro Magnetic Compatibility) | Supported | Warranty | 3-year |
Temperature Range | 0 to 70°C (32 to 158°F) | OEM/ODM | Supported |
Protocols | 10G Ethernet, MSA Compliant,RoHS | ||
Supported Applications | 10GBase-T, 5GBase-T,2.5GBase-T, 1000Base-T |
Features
Application
Pin Definitions
Pin | Symbol | Description | Notes |
1 | VEET | Transmitter Ground Common with Receiver Ground | 1 |
2 | TFAULT | Transmitter Fault Not supported | |
3 | TDIS | Transmitter Disable Laser output disabled on high or open | 2 |
4 | MOD_DEF | Module Definition Data line for Serial ID | 3 |
5 | MOD_DEF | Module Definition Clock line for Serial ID | 3 |
6 | MOD_DEF | Module Definition Grounded within the module | 3 |
7 | Rate Select | No connection required | |
8 | LOS | High indicates no linked low indicates linked | |
9 | VEER | Receiver Ground Common with Transmitter Ground | 1 |
10 | VEER | Receiver Ground Common with Transmitter Ground | 1 |
11 | VEER | Receiver Ground Common with Transmitter Ground | 1 |
12 | RD | Receiver Inverted DATA out AC Coupled | |
13 | RD | Receiver Non inverted DATA out AC Coupled | |
14 | VEER | Receiver Ground Common with Transmitter Ground | 1 |
15 | VCCR | Receiver Power Supply | |
16 | VCCT | Transmitter Power Supply | |
17 | VEET | Transmitter Ground Common with Receiver Ground | 1 |
18 | TD | Transmitter Non Inverted DATA in AC Coupled | |
19 | TD | Transmitter Inverted DATA in AC Coupled | |
20 | VEET | Transmitter Ground Common with Receiver Ground | 1 |
Notes: | |||
1.Circuit ground is connected to chassis ground 2.PHY disabled on TDID >2.0 V or open enabled on TDIS<0.8 V 3.Should be pulled up with 4.7k to 10k Ohms on host board to a voltage between 2.0V and 3.6V MOD_DEF(0) pulls line low to indicate module is plugged in |
Diagram Mechanical Drawing
Compatibility
Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, Huawei, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer 3-year warranty.
For this GTS-T0096-08 SFP+ T RJ45 copper transceiver, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.
Corresponding Compatible Brand/Part Number | |||
Brand | Part Number | Brand | Part Number |
Gigaopto | GTS-T0096-08 | Arista | SFP-10GE-T80 |
Cisco | SFP-10G-T-80 | Juniper | EX-SFP-10GE-T |
Dell | GP-10GSFP-T80 | H3C | SFP-XG-T80 |
Netgear | AXM766 |