torque device

... soft and hard test. Maximum : 10～400.0N.m With three-dimensional adjustable table Features of B400 Tester/Electric Batch Torqu...

... Product name GSR50 circulation box Banknote PN KD04014-D001-82 Brand Fujitsu Keyword ATM Machine ATM Parts Used in Fuji...

...14.1 (test B), the test is applied to assess whether the mechanical suspended of rigid suspension luminaire has sufficient safety fac...

... SHE Super High Gearbox 16-18 Twin Screw Extruder Our gearbox series are transmission , which are specially designed for twin-...

... labor can conveniently apply a of around 10 Nm within the availability of a proper hand-vane and moment arm fixtures (Seo and Armstr...

..., which is characterized in that the tension is still maintained in the range even after a line speed changes. This motor controller is an a...

Dental handpiece torque tester Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Model, test...

... Flange SLFN-500 0-15000rpm 0.2%FS economical flange for pump sensors Flange is a pipe and pipe connected parts, used for the c...

Dental Electric Implant Torque Wrench Torque Driver Wrench Ratchet SPECIFICATIONS: Torque Wrench:10-40Ncm Medical Grade Stainless Steel 100% Top Quali...

Soft Cable Tester 0.1-0.425N.m Tester Tensile Strength Testing Machine Product introduction: HC9918 soft cable test is a p...

... Brushless Electric Screwdriver GES Series Characteristic Conical design, good line of sight, easy to disassemble and install. The adj...

... Transducer with 0-5V 0-10V 4-20mA output Contactless shaft to shaft rotary sensor FYTG is intended for both and speed measurem...

... Automatically Frequency Converter Product Features 1. Utilize standard 32-bit DSP special chipset, non-PG vector control 2. Free adjustable...

...art solution designed to revolutionize the functionality and user experience of toilet seats. This innovative combines the power of silicone...

... Hydraulic Motor BMM BMP BMR BMS BMT BMV315 1. Characteristic Features 1. Advanced manufacturing for the Geroler gear set,which use l...

...designed to test the opening and closing of various caps. It is mainly used to test the opening and closing and correction tightening...

...the sleeve from the outside to form a mechanical compression fit between the shaft and the shaft, and transmit , and the expansion sleeve its...

... of IEC60598-1, Chapter 4.14.6, Figure 11 of GB8898-2011, Figure 11 of IEC60065, IEC60335, IEC60884 and other standards. It is suitable for testing...

... Z5-110*155 Locking Assemblies Power Shaft Locking Selecting locking assembly should meet the following requirements: A. Transmission ...

... , High- Transmission, Keyless Locking Assembly Quick Detail: Keyless Locking 02, High- Transmission, Locking Assembly S...