ti rod

.../bar Gr1/Gr2 tanium Round Hex Flat Bar tanium Grade 1/2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels ...

...,ruby glass ball Features: :Sapphire (Al2O3:3+) - titanium - doped sapphire crystals is the most widely used crystal for wavelength tunable las...

... Bearing 6BD1 6BB1 OEM: 5-11510-048 Specifiion: Product Name Con Bearing Engine Model 6WG1 No. of Cylinders 6 MOQ 1 PCS or 1 Set Product Ran...

... tolerance is available. Material Grade: GR1, GR2, GR3,GR4, GR5, GR7, GR9, GR12, GR16, GR17, GR23, -6Al-4V ELI, -3-8-6-4-4, -6-2-4-2, -6-6-...

... For Laser Highly frequency + doped (tanium doped)sapphire single crstal used in laser/ Al2O3 Crystal for laser machine,tanium doped Sa...

TC4 (-6Al-4V) tanium Alloy and Bars 1, Products: TC4 (-6Al-4V) is one of the most widely used high-strength titanium alloys at present. TC4...

... The Feeding Unit is an essential tool used in the production of aluminum alloy bars. This innovative equipment is designed to accurately co...

Monel 400 rod Nickel Copper Alloy with Al Ti C Mn Fe S Si Monel 400 rod is a nickel copper alloy pipe with excellent corrosion resistance, particularl...

...machining of heat-resistant alloys and alloy, such as end mill, drill, reamer. With high hardness and wear/corrosion resistance, suitable for th...

... Ruby With Different Diameters Introduction Sapphire, which is derived from the Latin Spphins, which means blue; it belongs to the corundum ...

...,polish Standard: As per ASTM B 365 Grade Main elements 　 Impurity content less than % 　 Ta Nb Fe Si Ni W Mo Nb O C H N Ta1 Remain —— 0.005 0.00...

..., call us please. Item surface diameter/mm length/mm content density(g/cm³) pucing methord Dia tolerance L tolerance TZM grind ≥3-25 ±0.05 ＜...

... Carbide , Tungsten Alloy For PDC Drill Bit Description: With high hardness and wear / corrosion resistance, suitable for the manufacturing...

ASTM B348 tanium Polished Bars Products Detail Item ASTM B348 tanium Bars Material Pure tanium, tanium Alloy Grade tanium Gr1, Gr2...

... deposition method to coat the surface of high-strength tool substrate with a few microns of high hardness and high wear resistance refractory -A...

...-6Al-4V with Customized Shape For Research We specialize in manufacturing titanium, molybdenum, tungsten, nickel and other alloy products in ...

... Mg>96% For Water Heater M6 Dia20mm L200-300mm Magnesium s for Corrosion protection Protect water heater, water containers of steel structure...

... with straight holes for making the reamer Dimension: Outer Diameter: 6.0mm-0.009 Inner Diameter: 1.2mm Length: 100mm +0.2/+0.5 Roughness: Ra0....

... of heat-resistant alloys and alloy, such as end mill, drill, reamer. 1. Grade: ISO K10-K40 2. Diameter: 3 mm-26 mm 3. Length: 330 mm 4. Surface...

...astm a276 420 stainless steel round alloy steel Inconel 625 Chemical composition, % Ni 58 Cr 20-23 Fe ≤5 Mo 8-10 Nb 3.15-4.15 C ≤0.01 Mn ≤0.5 S...