Length in 330 mm Unground Tungsten Carbide Rods For End Mill, Tunring, Reamers

Brand Name:JWE

Certification:ISO9001

Model Number:JI10/JF10/JF12

Minimum Order Quantity:5 Kilograms

Delivery Time:10-15 work days

Payment Terms:D/P, T/T, Western Union

Contact Now

Add to Cart

JWE CARBIDE CO., LTD.

Active Member

Location: Zhuzhou Hunan China

Address: LUKOU ECONOMIC DEVELOPMENT ZONE, ZHUZHOU CITY, HUNAN, P.R. CHINA 412100

Supplier`s last login times: within 48 hours

View Contact Details

Product Details Company Profile

Product Details

Unground Tungsten Carbide Rods With Two Straight Coolant Hole ISO K10-K40 for End Mill

Product Introduction

The Tungsten Carbide Rods, are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer.

1. Grade: ISO K10-K40
2. Diameter: 3 mm-26 mm
3. Length: 330 mm
4. Surface: Unground or H₆ Ground

Carbide Rod With One Straight Hole

Unit: mm

Other custom-sized rods could be tailor-made.

D	L	B	Tolerance
3.0	300/310/330	0.3	±0.1
4.0	300/310/330	0.6	±0.1
6.0	300/310/330	1	±0.15
8.0	300/310/330	1.3	±0.15
10.0	300/310/330	2	±0.2
12.0	300/310/330	2	±0.2
14.0	300/310/330	2	±0.2
16.0	300/310/330	2	±0.2
18.0	300/310/330	3	±0.25
20.0	300/310/330	3	±0.25
22.0	300/310/330	3	±0.25
24.0	300/310/330	4	±0.3
26.0	300/310/330	4	±0.3
28.0	300/310/330	4	±0.3
30.0	300/310/330	5	±0.35

Carbide Rod With Two Straight Coolant Hole

Unit: mm

D	L	B	Tolerance	TK	Tolerance
3.0	300/310/330	0.4	±0.1	1.52	±0.08
4.0	300/310/330	0.8	±0.1	1.72	±0.08
5.0	300/310/330	0.8	±0.1	1.92	±0.08
6.0	300/310/330	1.0	±0.1	2.90	±0.1
7.0	300/310/330	1.0	±0.15	3.40	±0.1
8.0	300/310/330	1.0	±0.15	3.85	±0.15
9.0	300/310/330	1.4	±0.15	3.85	±0.15
10.0	300/310/330	1.4	±0.15	4.85	±0.15
11.0	300/310/330	1.4	±0.15	4.85	±0.15
12.0	300/310/330	1.8	±0.15	5.85	±0.15
13.0	300/310/330	1.8	±0.15	5.85	±0.15
14.0	300/310/330	1.8	±0.15	6.85	±0.15
15.0	300/310/330	2.0	±0.2	6.85	±0.15
16.0	300/310/330	2.0	±0.2	7.85	±0.15
17.0	300/310/330	2.0	±0.2	7.85	±0.15
18.0	300/310/330	2.0	±0.2	8.85	±0.15
19.0	300/310/330	2.0	±0.2	8.85	±0.15
20.0	300/310/330	2.5	±0.25	9.80	±0.2
21.0	300/310/330	2.5	±0.25	9.80	±0.2
22.0	300/310/330	2.5	±0.25	10.80	±0.2
23.0	300/310/330	2.5	±0.25	10.80	±0.2
24.0	300/310/330	3.0	±0.25	11.75	±0.25
25.0	300/310/330	3.0	±0.25	11.75	±0.25
26.0	300/310/330	3.0	±0.25	12.75	±0.25

Carbide Rod With Two Helix Coolant Hole

Unit: mm

D	L	B	Tolerance	TK	Tolerance	Pitch ±0.5°
3.0	300/310/330	0.4	±0.1	1.6	±0.1	16.32
4.0	300/310/330	0.6	±0.1	2.1	±0.1	21.77
5.0	300/310/330	0.7	±0.1	2.4	±0.2	27.21
6.0	300/310/330	0.7	±0.1	2.4	±0.2	32.65
7.0	300/310/330	1	±0.15	3.5	±0.2	38.09
8.0	300/310/330	1	±0.15	3.8	±0.2	43.53
9.0	300/310/330	1.4	±0.15	4.5	±0.3	48.97
10.0	300/310/330	1.4	±0.15	4.5	±0.3	54.41
11.0	300/310/330	1.4	±0.15	4.9	±0.4	59.86
12.0	300/310/330	1.4	±0.15	5.85	±0.4	65.3
13.0	300/310/330	1.75	±0.2	6.1	±0.4	70.74
14.0	300/310/330	1.75	±0.2	6.7	±0.4	76.18
15.0	300/310/330	1.75	±0.2	7.3	±0.4	81.62
16.0	300/310/330	1.75	±0.2	7.9	±0.4	87.06
17.0	300/310/330	1.75	±0.2	8.5	±0.4	92.5
18.0	300/310/330	2	±0.25	9.15	±0.4	97.95
19.0	300/310/330	2	±0.25	9.7	±0.4	103.39
20.0	300/310/330	2	±0.25	9.9	±0.5	108.83
22.0	300/310/330	2	±0.25	11.1	±0.5	125.15
25.0	300/310/330	2	±0.25	12.8	±0.5	136.05

Production and Test of Tungsten carbide Rods:

1. In the powder Mixing Workshop, raw material's mixtures will be prepared as per the customer’s requirement with our wet-grinding machine.
2. Before mass production, a trial pressing and sintering will be taken, and we check the appearances and the dimensions of the samples with a micrometer to ensure that the requirements of the drawings meet before batch production.
3. Bulk production, press the raw materials to shaped blanks, and the physical properties of the carbide must be passed by semifinished inspection.
4. Sintered blanks to finish products. The inspection of finished products to ensure the best quality and production capacity.

Quality Control:

1. Each rod will be a drop from a height of 1.2 m, called drop test.
2. All raw materials are tested in terms of density, hardness, and TRS before use.
3. Every piece of product goes through in-process and final inspection.
4. Every batch of products is traceable.

Company Profile

Founded in March 2005, Zhuzhou JWE Cemented Carbide Co., Ltd. is located in Wantang Industrial Park, Zhuzhou City - the largest cemented carbide products manufacturing center in Asia. The company integrates R&D, manufacturing, sales and technical services of high-performance cemented carbide products, dedicated to providing quality solutions for energy, mining, engineering, machine tools, aerospace and other industries. With two decades expertise together with advanced facilities and production lines the company strives to meet customers’ demanding challenges.

JEW is a special supplier of PetroChina and Sinopec and a member of XCMG's expert group. It works with top universities and institutes in China to enhance its R&D capabilities, Central South University and Hunan University of Technology, among others. The company possesses 5 patents for invention, 15 patents for new technology and the list is still growing, all in order to provide customers with quality products and services.

The company is people-oriented and has a group of experienced technicians, including 2 doctors and 5 national experts in powder metallurgy. The annual production capacity is 1000 tons of cemented carbide products and 8 million pieces of CNC inserts. The company's main products are cemented carbide buttons, PDC substrates, wear protection parts and non-standard parts for aerospace, mining, energy, transportation, general engineering and machine tool industry.

The company is fully certified by ISO9001:2015 quality management system and ISO14001:2015 environmental management system. Over the years, the company has been awarded nationally and gained recognition both overseas and at home.

Creating higher value for customers is the company’s constant commitment. JWE sincerely looks forward to cooperating with you!