.... It has very low solubility in water, and is etched by many acids such as hydrobromic and hydrochloric acids. It is commercially available as powd...
Add to Cart
CdTe Thin film solar cell,BIPV Model:CdTe Pm:115W VOC:124.5V Isc:1.32A Vm:95v Im:1.21A L1200*W600*6.8MM Full line solution Applicable component range ...
Add to Cart
... for Battery Product Description Pure Nickel Strip is primarily used for chemical treatment, preservation and production of synthetic fiber...
Add to Cart
... alloy Sacrificial Anode , Condenser Anodes Marine, vessel application in salt water Production standard:ASTM Chemical Composition (% max.) ...
Add to Cart
... by HLS Paint (Shanghai) Co., Ltd. It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high prope...
Add to Cart
Material: Pure nickel strip Physical Properties: Spot welding is good, the resistance is lower, battery discharge time longer, the battery spot weldin...
Add to Cart
...cooled photoconductive HgCdTe (mercury , MCT) MWIR infrared detector and RS046 cryocooler. By adopting the MCT technology, this co...
Add to Cart
...Available Abstract of ZnTe Zinc (ZnTe) is a direct bandgap semiconductor widely used in optoelectronics and photonics. With a bandgap of ...
Add to Cart
... zinc-nickel alloy layer containing 13% nickel is 6-10 times higher than zinc, superior to and titanium alloys. At the same time ha...
Add to Cart
...resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard ,key parts,such as valve...
Add to Cart
...material is Polypropylene homopolymer, to which agents are added for production purposes and to improve the mechanical . Polypropylene is...
Add to Cart
... : a)Flexible, excellent tenacity and high mechanical strength. b)Bellows inside and outside. c)Luster in surface and Insulation. d)wind ...
Add to Cart
... Head Machine Bolt Material Carbon Steel Standard DIN 5903-1 Class 4.6, 5.6 Diameter M10, M12, M16, M20, M22 Finish Plain, Black Oxide, Zi...
Add to Cart
...,5.13(Ω)etc Power 10.08,10.3,10.8,11.78,12,14k,15(W)etc Max. Temp. 1200(℃) Main and technical parameters of iron chromium aluminum elect...
Add to Cart
... a high suppression to infrared; 3. Stable temperature characteristics; 4. Internal integrated high gain photocurrent amplifier; 5. Built ...
Add to Cart