Add to Cart
Item NO.:AVE
Lead Time:35 days
Product Orgin:China
Shipping Port:Yangzhou/Guangzhou
Payment:EXW, FOB, CIF etc
MOQ:1
goods stock:500
Product Detail
No | Model | AVE-50 |
1 | Working capacity | 50L |
2 | Heating method | Steam/electric |
3 | Mixing type | Upper frame oar scrape mixer |
4 | Mixing motor power | 1.1KW |
5 | Mixing frequency | 1.1KW |
6 | Mixing Speed | 0-65rpm |
7 | Homogenizer | Bottom homogenizer with frequency inverter |
8 | Bottom Homogenizer power | 2.2KW |
9 | Speed | 0-3000rpm |
10 | Hydraulic lifting system | 0.55KW |
11 | Vacuum pump | Water cycle vacuum pump, power: 0.75KW |
12 | Control method | Button control/ HMI |
13 | Frequency converter | Delta/Panasonic/Mitsubishi |
14 | Electrical components | Schneider/Delixi |
15 | Jacket | Double jacket,3 layers |
16 | Tank materials | Inner layer 4mm/SUS316 Middle layer 4mm/SUS304 Outer layer 2mm/SUS304 |
Working Principle
The materials in the water-phase tank and oil-phase tank are heated
up and stirred. After they are thoroughly mixed, they will be
transferred to the emulsifying tank by vacuum pump. The material
will be stirred by the upper part of the central paddle, combined
with the PTFE scraper sweeping the wall, the material will be
stirred thoroughly and meanwhile be pushed down to the emulsifier
at the low part of the central axle. With very high speed
emulsifying effect, the material will be seriously cut, sheared,
and cracked into 200nm - 2um particles. The bubbles appear during
the process will be sucked out promptly in the vacuum status in the
tank.
We provide Turn-key project service to customer.
1. Factory Layout design;
2. Factory Decoration based on GMP standard;
3. Formula of products;
4. Raw material etc;
5. Machine design, whole production line from A to Z;
6. Shipping service, FOB, CFR, CIF etc;
7. Installation service. Training service, Maintenance service.
Factory: