220-240Vac Led Emergency Converter Used With Ternary Lithium Battery
Brand Name:HAISEN
Certification:CE UKCA
Model Number:ES-EOF02-05-01
Minimum Order Quantity:100pcs
Delivery Time:Standard Models Within 3 Weeks
Payment Terms:D/A, D/P, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
220-240 Vac Led Emergency Converter Used With Lithium Battery
Features
- Constant output power
- Used with lithium battery
- Suits forLED fitting with external LED driver
- Accessary test switch and LED indicator
- With multi-protection function:
-battery overcharge protection
-battery over-discharge protection
-output overload protection
-short-circuit protection
-Open load protection
Parameter Table
| Input voltage | 220-240 Vac 50/60Hz |
| Input Current | 0.06A(Max) 230V AC |
| Input Power | <4W@230Vac |
| Power Factor | ≥0.5 |
| Load output voltage | 20-60VDC |
| Load output current | 300-30mA |
| Battery charging current | 200mA(Max) |
| Battery charging time | 24h(Max) |
| Battery specifications | Ternary lithium battery |
| Storage temperature | 0-60℃ |
Maximum shell temperature | 75℃ |
| Storage temperature | -20-40℃ |
| Dielectric Voltage withstan | 1.5KVac 5mA 60S (Input to the housing) 3KVac 5mA 60S (Input to output) |
| IP Rating | IP20 |
| LED Indication | LED Green |
Model Selection table
| Model No. | Input voltage | Output voltage | Output Current | Lithium battery | Emergency time | Emergency power |
ES-E0F02-01 | 220-240Vac 50/60Hz | 20-60V DC | 100-30mA | 1800mAh/7.4V | 3Hrs | 2W |
ES-E0F03-01 | 220-240Vac 50/60Hz | 20-60V DC | 150-50mA | 2000mAh/7.4V | 3Hrs | 3W |
ES-E0F04-01 | 220-240Vac 50/60Hz | 20-60V DC | 200-60mA | 2500mAh/7.4V | 3Hrs | 4W |
ES-E0F05-01 | 220-240Vac 50/60Hz | 20-60V DC | 250-80mA | 3000mAh/7.4V | 3Hrs | 5W |
Dimension (Unit:mm)
Wiring Diagram
Operation Instructions
1. Connect the wires according to the wiring diagram.
2. Power on L and N, and close the switch S1. At this time, the
load light will turn on, the indicator light of the emergency power supply will turn green, and the emergency power supply is
charged normally. Turn off this switch S1, the load light will go out.
3. Simulated emergency: close switch S1, turn on the load light,
and then press the switch (TEST SWITCH), then switch to emergency power supply mode, the green light of the emergency power
indicator will go out. Then release the switch(TEST SWITCH), at this time it should be switched to external drive
power supply, the green light of the emergency power indicator will light up.
4. Power failure and incoming call, the phenomenon should be the
same as simulated emergency.
Battery Application Notice
1.The battery should be recharged and discharged semiannually in normal use conditions.
2.Do not connect to the circuit when the battery is not use to prevent over-discharge of the battery due to self-consumption of the circuit board.
3.Please keep the battery from the heat source when installing and using, and only be allowed to use in certain working temperature range.
4.The battery should be stored in a cool and dry environment.
5.After long time storage, the battery is cycled every 6 months as required.
220-240Vac Led Emergency Converter Used With Ternary Lithium Battery
Inquiry Cart
0