Top Popular Foam Gun Economical Disposable Plastic Polyurethane Foam Gun for Building Cons

G-5 Air Foam Gun :

Specifications:

This PU foam gun is designed for the professional application of polyurethane foam assembling, filling and general purposes. It is highly suitable for the environment-friendly low-cost use of polyurethane foam bottles. The gun is suitable for controlling spray and accurate filling of joints, making it fast, simple, accurate and safe to mount components such as door and window frames.

Plastic Air Foam Gun G-6 Application Range:

1. Fire block
Seal plumbing venting systems, seal plumbing penetrations, seal concealed electrical penetrations,
Seal recessed light fixtures, seal duct work penetrations between floors
2. Spray foam
Insulate and seal corners of joining materials, insulate wall cavities, insulate and seal ceiling floor,
Insulate and seal underside of bath tub, insulate and seal rim and band joints
3. Window & door
Seal window frames, seal door frames, seal skylights
4. Sealant
Seal attic hatchways, seal exterior plumbing penetrations, seal gas line penetrations, seal exhaust
Fans, seal electrical outlets, seal sill plates, seal dryer vents

Introduction :

1. Rocking the pu foam pot harshly before setting on the pistole.
2. Rolling the pu foam pot to the adapter(not too tight).
3. Pull the trigger and let the pu foam flow out for 2 seconds in order to fill the gun barrel with pu foam without air or other gas.
4. The pu foam pot should be vertical to the earth level when working
5. Control the pu foam flowing rate by adjusting the adjustment wheel.
6. Rock a new pu foam pot beforing changing it and put the new one on the gun as soon as the old one is put down(in 1 minute).
7. No other substances is allowed to get into the adapter when changing the pu foam pot, since it would stick the gun inside if something goes in.
8. Not seperated, the gun and the pu foam pot should both be put vertically when not working.
9. For washing and cleaning, the detergent should be put inside immediately after taking down the pu foam pot and should not be taken away until working next time.
10. Fix the needle on the nozzle when working. But note: The needle should be taken apart from the gun and cleaned, and no hardware is allowed to clean the needle, since it may hurt the needle and lead to leakage.
11. Handle with care.

FAQ:

Q1. How to use?

A: 1. before use, shake up the foam tank top and bottom to 1 minute

2. screw the tank to the adaptor, remember not too tight

3. press the trigger, let the foam flow for 10 seconds to eliminate the air in the barrel

4. if you want to contral the output of foam, you can adjust the adjusting screw, the tighter the adjusting screw,

the less the output.

5. after use, you should clean up the foam gun with cleaning agent.

Q2. Our Services

A: 1.Producing high quality foam guns for 14 years

2.High quality guarantee and young team

3.Any response from customers will be highly appreciated.

4.Certification: ISO9001,CE

5.High quality, competitive price,satisfactory service for your review.

6.Send samples by DHL , TNT OR EMS OR UPS, samples are free, you should pay freight fee, but we will

return it when you take order.

Q3. What is your foam gun sample making time?

A: 1-2days.

Q4. What is your shipping way?

A: By sea,by air,by express. Any shipping way is available.

Q5. What is your mass products delivery time?

A: 25-50days. Exact time should be accord to the style, QTY

Q6. What is your foam gun payment?

A: if your order is small, we use 100%TT, if your order is big,we use 30%TT

Q7. Can we order the color we want?

A: Yes,we can make any color you want

Q8. What is your foam gun sample fee?

A: sample is free, but you should pay freight fee, we will return it when you take order.

Q9. Can you do custom logo on thefoam gun?

A: Yes,we can do custom logos .

Ningo Seelion Co.,ltd is an OEM manufacturer and a trader with more than 10 years trading experiences which located in Ningbo ,Zhejiang,China.

Seelion has developed a comprehensive range of products to meet clients' various requirements on air painting gun, washing gun, blowing gun, inflating gun, greasing gun, gauge tool, air tools kit etc.

At present, we have lots of excellent manufactures , which factories possess hundres of numerical lathes, dozens of CNC auto drilling machines, integrated assemble lines and auto-packing lines. Together with our excellent facory partners, we are now capable of producing about 5,000 guns daily to meet your requirements.

Our products are exported to many countries in the world such as North America, European Union, South-East, Asia, Africa and the Middle East.
Based on the high-efficiency management, advanced-tech equipments and professional workers, we have thus built the confidence of meeting the fierce competition ahead of us, with vision to be one of the leading partners worldwide through our continuous creativity and cooperation in providing high quality products and service persistently.

In addition, the approval of UL, GS, CE and ISO9001 quality management system further ensure the stability and consistence of our products.We warmly welcome customers from all over the world to have
visits or business cooperation with us!