Alumina Cement Kiln Lining Refractory Fire Bricks Low Thermal Conductivity

Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick

Definition:

Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick generally refer to refractory bricks with a density less than 1.3 g/cm3. Due to the characteristics of low density, high porosity, small thermal conductivity, good thermal insulation and certain compressive strength, light-weight refractory bricks have been widely used in heat treatment equipment.

Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick is also known as high aluminum insulation brick. Lightweight refractory material with alumina content above 48%, mainly composed of mullite and glass phase or corundum. The bulk density is 0.4 to 1.35 g/cm3. The porosity is 66%～73%, and the compressive strength is 1～8MPa. Good thermal shock resistance.

Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick is a kind of insulation material adopting organic matter as ignition loss substance in order to increase the porosity of refractory, which has such advantages as high porosity, small volume density, good insulation effect, high mechanical intensity, small thermal conductivity and long service life. For various industrial kilns & furnaces, it is a kind of essential refractory for energy saving and temperature preservation
.

Advantage:

1. Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick has advantages with small bulk density, high cold crushing strength, and high refractoriness under load, small dimension tolerance and good thermal shock resistance.
2. Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick has the lowest and most stable thermal conductivity in various insulating refractory bricks.
3. Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick can reduce the total weight of furnace body and the thickness of furnace wall effectively, improve heat efficiency, lower energy consumption, improve work conditions and production efficiency, and considerable economic benefit can be obtained.

Application:

Alumina Refractory Cement Kiln Lining Material Weight 0.8 High Aluminum Brick ​​​​​ ,also know as high alumina insulation brick. The lining and the heat insulation layer of the kiln ,and the part of the erosion of the material without strong high temperature meiting .The surface contact temperature shall not be higher than 1350℃.
High qulity high alumina bricks can be used in direct contact with the flame of the furnace lining ,but should not be used directly by slay erosion occasions.

Product Description:

What you will get from us is our best profession in service and the hospitality that you are willing to become our Friend.
So choosing us is the right choice for you. If you are interested in our products or if you have any question, pls feel free to contact us at any time. We will reply as soon as possible.

Zhengzhou ANNEC Industrial CO., Ltd. was founded at Sep, 2003, and has been a NASDAQ listed corporation since 2011(Stock code: ANNC). ANNEC had become refractory industrial leader provide core service such as refractory production, technology of blast furnace and hot blast stove and EPC contract project in China. Now ANNEC sets up Academician workstations, the Provincial Engineering and Technology Center, Hot Blast Stove Research Centre, ANNEC (Beijing) Engineering Technology Co., Ltd and four production sites as subsidiaries. Yearly refractory output is 150 kt.

ANNEC is a national hi-tech company, and is accredited with ISO9001:2008 quality control system standards, ISO12001:2004 environmental control system standards, and GB/T28001-2011 HAZOPS. ANNEC has set up a thorough and effective management system with practical considerations for her employees and community, and is persistent in promoting employee self-value and product products. Based on the efforts, ANNEC is the recipient of the prestigious 2012 Zhengzhou Mayor Quality Prize.

ANNEC has capability of manufacturing refractories materials of fireclay, high alumina, silica and insulating bricks and corresponding unshaped refractories for hot blast stove. Meanwhile, ANNEC also produce various refractories for coking, sintering, casting house, torpedoes, iron ladles and steel ladles. ANNEC’s products have been sold to America, Japan, Korea, India, Iran, Vietnam, Turkey, Malaysia and Indonesia; get the customer's endorsement in the domestic and world. At the same time, ANNEC’s testing center shoulder examinations of products quality and tests of new product development.

ANNEC has been providing matched refractories of different type HBS for CERI, CISDI, WISDRI, CSGI and Kalugin，P•W，Danieli and SIEMENS VAI in their worldwide projects. ANNEC is awarded as excellent supplier by Baosteel, CSGI, and MCC etc.

ANNEC owns more than 50 patent technologies which include checker bricks with19 holes; 37 holes, 61 holes, ceramic burner of swirl-cutting top combustion hot blast stove, cone-column composited ceramic burner for top combustion hot blast stove, symmetric layout structure of hot blast stove, three section hot blast stove with independent structural. ANNEC was authorized to fulfill editing 7 standards of national and of industrial, including 《Silica Brick》, 《High Alumina Brick》， 《Refractory Brick for HBS Ceramic Burner》,《Refractory Standard Configuration of HBS System 》 and 《Energy Saving Technical Specification of Top Combustion HBS》.

ANNEC successively get awards such as “Chinese Outstanding S&T Innovation Enterprise”、“AAA grade Credit Enterprise”“Chinese Famous Brand Trademark China” “Provincial Famous-brand Product, Henan”“Provincial Credit Enterprise, Henan” “Zhengzhou Environmental Enterprise”

ANNEC owns core culture which is to make customer satisfaction, staff satisfaction and shareholder satisfaction; and continuously push forward technological development of HBS and progress of refractory technology by its great efforts, and gradually becomes one of the best professional suppliers in high temperature industry of global