White Steatite Ceramics For Band Heaters Electrical Insulation High Insulated

steatite ceramic for band heater

Ceramic Band heaters

Ceramic Band Heaters provide long life and use less wattage in plastics extrusion and injection molding applications.These band heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire.Configuration choices allow selection of one or two piece heaters,type of closure,and type of leads/post terminals.Diameters of 2-1/4′′ or greater and widths of 1′′ to 16′′ are available.Leads normally exit 180° from gap.Options include terminal boxes,holes,heat saver(extra)insulation,3-phase power,dual voltages,partial coverages,European connectors,and perforated sheaths without insualtion for air cooled applications.To order,specify quantity,configuration,inside diameter,width,voltage,lead length if applicable and any options.

Advantage of Ceramic Band Heaters

A. Lower Operating Cost-because of superior insulation,less heat escapes to the air and less wattage is required to maintain barrel temperature.Also,the heater is safer because the external surface is much cooler.

B. Operator comfort-with the majority of the heat going directly to your process,the ceramic band heater gives off significantly less heat to ambient air than a mica band heater.

C. Longer heater life-because all materials used are rated to operate at very high temperatures.

D. Higher operating temperatures

E. Flexible-easy to install and remove

F. Dual heat transfer-heat is transferred through both radiation and conduction so a near perfect fit is not required with other heaters,such as mica heaters.

Specification

Our company

Wuxi Special Ceramic Electrical mainly produces alumina, Silicon nitride, Zirconia, Steatite, Boron nitride, Cordierite,mullite products, widely used in metal welding, electronic conductor, mechanics, assembling, insulation, chemicals, instrument, textile, nuclear industry, aerial field.We accept trial produce according to the drawing or sample.It usually takes 15 days to finish trial product.Mass produce usually takes 30 days.Goods' package is carton or PLT.It can be negotiable with each other.
We mainly sell goods to toshiba lighting group in Japan and Europe.Our aim is to deliver goods with high quality at quick delivery date.

Quality guarantee:mass produce by 100% inspection

Our History

Wuxi Special Ceramic Electrical as a leading special ceramic manufacturer,the factory is located in Chinese famous pottery town “YiXING” city about 200 km from Shanghai. From the beginning of businees ,has been dealing with export business for more than 10 years.

We specialized in special ceramics for more than 20 years. Now,we own 1 gas shuttle kilns, 3 full-automation electric pushed slab kilns and so on.

Our company mainly produces alumina, Silicon nitride, Zirconia, Steatite, Boron nitride, Cordierite,mullite products, widely used in metal welding, electronic conductor, mechanics, assembling, insulation, chemicals, instrument, textile, nuclear industry, aerial field.

We mainly sell goods to toshiba lighting group in Japan.Our aim is to deliver goods with high quality at quick delivery date.

Our products below

A Electronic / electric ceramic (electronic porcelain)

1) Ignition electrodes, Ceramic igniter, ignitor Ceramic sparking

2) Ceramic insulators

3) Ceramic lamps

4) ceramic shell for electronic conductor

5) Ceramic bobbins

6) Ozone generator

B) Textile Ceramics

Ceramic guide, beads, eyelet, slit, roller, hook ect.

C) Engineering & Mechanical ceramics

1) Ceramic rod,

2) Ceramic tube,

3) Ceramic seal,

4) Ceramic threaded shaft, Ceramic bolt

5) Ceramic nozzle,

6) Ceramic Heat-resisting part

Production Market

Europe,Japan