ISO K10 - K40 Tungsten Carbide Rods Length 330mm With Coolant Hole

Brand Name:JWE

Certification:ISO9001

Model Number:JI10/JF10/JF12

Minimum Order Quantity:5 Kilograms

Delivery Time:10-15 work days

Payment Terms:D/P, T/T, Western Union

Contact Now

Add to Cart

JWE CARBIDE CO., LTD.

Active Member

Location: Zhuzhou Hunan China

Address: LUKOU ECONOMIC DEVELOPMENT ZONE, ZHUZHOU CITY, HUNAN, P.R. CHINA 412100

Supplier`s last login times: within 48 hours

View Contact Details

Product Details Company Profile

Product Details

Tungsten Carbide Rods With Coolant Hole Helix Coolant Hole Straight Hole

Product Introduction

The Tungsten Carbide Rods, are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill, reamer.

1. Grade: ISO K10-K40
2. Diameter: 3mm-26mm
3. Length: 330mm
4. Surface: Unground or H6 Ground

Carbide Rod With One Straight Hole

Unit: mm

Other custom size could be discussed.

D	L	B	Tolerance
3.0	300/310/330	0.3	±0.1
4.0	300/310/330	0.6	±0.1
6.0	300/310/330	1	±0.15
8.0	300/310/330	1.3	±0.15
10.0	300/310/330	2	±0.2
12.0	300/310/330	2	±0.2
14.0	300/310/330	2	±0.2
16.0	300/310/330	2	±0.2
18.0	300/310/330	3	±0.25
20.0	300/310/330	3	±0.25
22.0	300/310/330	3	±0.25
24.0	300/310/330	4	±0.3
26.0	300/310/330	4	±0.3
28.0	300/310/330	4	±0.3
30.0	300/310/330	5	±0.35

Carbide Rod With Two Straight Coolant Hole

Unit: mm

D	L	B	Tolerance	TK	Tolerance
3.0	300/310/330	0.4	±0.1	1.52	±0.08
4.0	300/310/330	0.8	±0.1	1.72	±0.08
5.0	300/310/330	0.8	±0.1	1.92	±0.08
6.0	300/310/330	1.0	±0.1	2.90	±0.1
7.0	300/310/330	1.0	±0.15	3.40	±0.1
8.0	300/310/330	1.0	±0.15	3.85	±0.15
9.0	300/310/330	1.4	±0.15	3.85	±0.15
10.0	300/310/330	1.4	±0.15	4.85	±0.15
11.0	300/310/330	1.4	±0.15	4.85	±0.15
12.0	300/310/330	1.8	±0.15	5.85	±0.15
13.0	300/310/330	1.8	±0.15	5.85	±0.15
14.0	300/310/330	1.8	±0.15	6.85	±0.15
15.0	300/310/330	2.0	±0.2	6.85	±0.15
16.0	300/310/330	2.0	±0.2	7.85	±0.15
17.0	300/310/330	2.0	±0.2	7.85	±0.15
18.0	300/310/330	2.0	±0.2	8.85	±0.15
19.0	300/310/330	2.0	±0.2	8.85	±0.15
20.0	300/310/330	2.5	±0.25	9.80	±0.2
21.0	300/310/330	2.5	±0.25	9.80	±0.2
22.0	300/310/330	2.5	±0.25	10.80	±0.2
23.0	300/310/330	2.5	±0.25	10.80	±0.2
24.0	300/310/330	3.0	±0.25	11.75	±0.25
25.0	300/310/330	3.0	±0.25	11.75	±0.25
26.0	300/310/330	3.0	±0.25	12.75	±0.25

Carbide Rod With Two Helix Coolant Hole

Unit: mm

D	L	B	Tolerance	TK	Tolerance	Pitch ±0.5°
3.0	300/310/330	0.4	±0.1	1.6	±0.1	16.32
4.0	300/310/330	0.6	±0.1	2.1	±0.1	21.77
5.0	300/310/330	0.7	±0.1	2.4	±0.2	27.21
6.0	300/310/330	0.7	±0.1	2.4	±0.2	32.65
7.0	300/310/330	1	±0.15	3.5	±0.2	38.09
8.0	300/310/330	1	±0.15	3.8	±0.2	43.53
9.0	300/310/330	1.4	±0.15	4.5	±0.3	48.97
10.0	300/310/330	1.4	±0.15	4.5	±0.3	54.41
11.0	300/310/330	1.4	±0.15	4.9	±0.4	59.86
12.0	300/310/330	1.4	±0.15	5.85	±0.4	65.3
13.0	300/310/330	1.75	±0.2	6.1	±0.4	70.74
14.0	300/310/330	1.75	±0.2	6.7	±0.4	76.18
15.0	300/310/330	1.75	±0.2	7.3	±0.4	81.62
16.0	300/310/330	1.75	±0.2	7.9	±0.4	87.06
17.0	300/310/330	1.75	±0.2	8.5	±0.4	92.5
18.0	300/310/330	2	±0.25	9.15	±0.4	97.95
19.0	300/310/330	2	±0.25	9.7	±0.4	103.39
20.0	300/310/330	2	±0.25	9.9	±0.5	108.83
22.0	300/310/330	2	±0.25	11.1	±0.5	125.15
25.0	300/310/330	2	±0.25	12.8	±0.5	136.05

Production and Test of Tungsten carbide Rods:

1. We use the carbide Balls mill to mix the powder as per the customer’s requirement with our wet-grinding machine.
2. Before mass production, we have to do a trial pressing and trial sintering, and then we check the appearances and the dimension of the test sample with a micrometer to ensure that the requirements of the drawings can be met before batch production.
3. Bulk production, press the raw materials to shape blanks, and carbide tips must be passed by semifinished inspection.
4. sinter blanks to finish (HIP) and finished products' inspection to ensure the best quality and production capacity.

Quality Control:

1. Each rod will be a drop from 1.2m higher place.
2. All raw materials are tested in terms of density, hardness, and TRS before use.
3. Every piece of product goes through in-process and final inspection.
4. Every batch of product can be traced in our system.

Company Profile

Founded in March 2005, Zhuzhou JWE Cemented Carbide Co., Ltd. is located in Wantang Industrial Park, Zhuzhou City - the largest cemented carbide products manufacturing center in Asia. The company integrates R&D, manufacturing, sales and technical services of high-performance cemented carbide products, dedicated to providing quality solutions for energy, mining, engineering, machine tools, aerospace and other industries. With two decades expertise together with advanced facilities and production lines the company strives to meet customers’ demanding challenges.

JEW is a special supplier of PetroChina and Sinopec and a member of XCMG's expert group. It works with top universities and institutes in China to enhance its R&D capabilities, Central South University and Hunan University of Technology, among others. The company possesses 5 patents for invention, 15 patents for new technology and the list is still growing, all in order to provide customers with quality products and services.

The company is people-oriented and has a group of experienced technicians, including 2 doctors and 5 national experts in powder metallurgy. The annual production capacity is 1000 tons of cemented carbide products and 8 million pieces of CNC inserts. The company's main products are cemented carbide buttons, PDC substrates, wear protection parts and non-standard parts for aerospace, mining, energy, transportation, general engineering and machine tool industry.

The company is fully certified by ISO9001:2015 quality management system and ISO14001:2015 environmental management system. Over the years, the company has been awarded nationally and gained recognition both overseas and at home.

Creating higher value for customers is the company’s constant commitment. JWE sincerely looks forward to cooperating with you!