tungsten carbide rod blanks

... For Metal Working Wear Parts Application 1. Metal working, process into press tool, blade, c...

with hole is a high hardness, high strength product that main material is WC. We specialized in tungsten ca...

... mills & hole drilling tools, boring bar 5. For making reamers round bars have superior hardness, flexural strength, concentricity ...

... T.R.S N/mm2 Performance and recommended USES JC06F (ZK10UF) 14.9-15.1 ≥92.5 ≥3600 Suitable for making all kinds of integral cemented tool ...

Above 2.0 Od Can Be Ground To Make Drill And End Milling Cutter Tungsten Carbide Rod Product Details Product Name Tungsten Carbide Rod Material Tungst...

0.223" With 12.425" Long Tungsten Carbide Rods Blank W 2 Coolant Holes​ ISO K20-K40 Cobalt: 12% Outer diameter 0.223" Inner diameter: 0.039" Length: 1...

... with one small single hole 5. with chamfer 6. custom non standard Application Are 1. Cutting tools for machining: Mill...

... L/C, T/T, Western Union, MoneyGram, etc Main markets India, Turkey, Israel, Pakistan, Egypt, Germany, USA, Iran ,Thailand, etc 2.Applications Tung...

... 100MM length diameter 2mm~60.5mm. 2. The density of YG20C steel is 13.5g/cm, the hardness is 83HR, the density is good, and it ca...

Products Unground -length<100mm Unground -length 100~150mm Unground -length 310mm Unground -length 330mm Unground - 1 Coolant hole –length 310mm Unground - 1 Coolant hole –length 330mm Unground - 2 Coolant hole–length 310mm Unground - 2 Coolant hole–length 330mm Unground ......

for Drilling tools Our have different grade and right to use on different application; Specially we are produce the N...

YL10.2 Mirror Polishing Solid Tungsten Carbide Rod for Engrave Tools The surface finish of our carbide rods look very shiny, like mirror. Advantage: 1...

... conductivity and lowest thermal expansion of any pure metal. Its corrosion resistance is excellent and it can be attacked only slightly by most mi...

..., Good toughness, low coefficient of expansion etc, applications include drill bits, end mills, and reamers. Custom diameters ...

... tools for the machining of heat-resistant alloy and Ti alloy,also suitable for the manufacturing of micro drills used for machining PCB. -...

... round bars solid Our Advantage *Use 100% raw material *ISO 9001 Certific...

... with good quality and high perfomance Features: 1. Use 100% raw material 2. Stable chemic...

...Length 10-330 mm Solid Round Bar Solid raw material 10% cobalt alloy stock...

... called . These have many unique characteristics and applications, making them a useful and versatile material. Material Compo...

... our accurate selection, higher tool life,higher customized and higher cost-effectiveness can be achieved. Product Details--- Tung...