CASTABLE Monofrax S-3 Fused Cast Zirconia Corundum Bricks Component for Glass Furnace
Brand Name:HT
Model Number:Hongtai
Place of Origin:Henan, China
Shape:Brick
Material:CASTABLE
SiO2 Content (%):13%-16%
Contact Now
Add to Cart
Verified Supplier
Location:
Zhengzhou Henan China
Address:
Group 4, Chuling Village, Chaohua Town, Zhengzhou, Henan, China
Supplier`s last login times:
within 35 hours
Product Details
Company Profile
Product Details
High performance Monofrax s-3
Fused cast zirconia corundum bricks for Glass furnace
Product Description
monofrax s-3 s-4 s-5 AZS bricks Fused cast zirconia corundum bricks
as an important role used in Glass Furnace is made of pure alumina
powder and zircon sand and is composed of three main chemical
components of Al2O3, ZrO2 and SiO2,most widely used materials both
in glass contact and superstructure of glass melting furnaces.
Fused cast zirconia corundum block for Glass furnace are made of
high pure material, fired at high temperature by advanced
technology, with the advantages of high strength, high compression
resistance, good thermal shock resistance, good performance in high
temperature, good thermal conductivity,excelerosion resistance and
used for linings of furnace in glass industries
The difference and application of different grades of monofrax s-3
s-4 s-5 Fused cast zirconia corundum bricks
ER1681-Fused Zirconia Corundum Brick AZS33#:
The dense microstructure of AZS33# zirconium corundum bricks makes the bricks have good resistance to glass liquid corrosion, and it is not easy to produce stones or other defects in the glass furnace. It is the most widely used product in glass kilns, and is mainly used for the upper structure of the melting pool, the pool wall and paving bricks of the working pool, and the material channel.
AZS33 is the most widely used product in the cast AZS series, and has excellent performance in preventing contamination of glass liquid. It is widely used in the wall, bottom, upper structure and feeding channel of the glass furnace.
ER1691- Fused Zirconia Corundum Brick AZS36#:
In addition to having the same co-crystal structure as AZS33# fused zirconia corundum brick, 36# AZS brick has more chain-like zirconia crystals and lower glass phase content, so 36# fused zirconia corundum brick is corrosion resistant The performance is further enhanced, so it is suitable for areas where the flow rate of the molten glass is faster or the temperature is higher.
AZS36 s is a product with excellent performance in the cast AZS series. It has high resistance to glass erosion and low pollution. It is usually used in key parts such as the pool wall near the hot spot of the glass melting pool.
ER1711-Fused Zirconia Corundum Brick AZS41#:
AZS41# fused zirconia corundum bricks not only have the eutectic of silica and alumina, but also contain more uniformly distributed zirconia crystals. In the zirconia corundum brick system, its corrosion resistance is good. Therefore, the key parts of the glass furnace are selected so that the life of these parts is lower than other parts.
AZS41 is the product with the highest performance in the fusion cast AZS series. It has extremely high resistance to glass liquid corrosion and extremely high glass phase exudation temperature, and it has very low pollution to glass liquid. It is widely used in key parts of the hot spot of the glass furnace, such as the wall of the glass furnace, the corner of the feed opening, the liquid hole, the sill, the bubbling at the bottom of the tank, and the all-electric furnace.
ER1681-Fused Zirconia Corundum Brick AZS33#:
The dense microstructure of AZS33# zirconium corundum bricks makes the bricks have good resistance to glass liquid corrosion, and it is not easy to produce stones or other defects in the glass furnace. It is the most widely used product in glass kilns, and is mainly used for the upper structure of the melting pool, the pool wall and paving bricks of the working pool, and the material channel.
AZS33 is the most widely used product in the cast AZS series, and has excellent performance in preventing contamination of glass liquid. It is widely used in the wall, bottom, upper structure and feeding channel of the glass furnace.
ER1691- Fused Zirconia Corundum Brick AZS36#:
In addition to having the same co-crystal structure as AZS33# fused zirconia corundum brick, 36# AZS brick has more chain-like zirconia crystals and lower glass phase content, so 36# fused zirconia corundum brick is corrosion resistant The performance is further enhanced, so it is suitable for areas where the flow rate of the molten glass is faster or the temperature is higher.
AZS36 s is a product with excellent performance in the cast AZS series. It has high resistance to glass erosion and low pollution. It is usually used in key parts such as the pool wall near the hot spot of the glass melting pool.
ER1711-Fused Zirconia Corundum Brick AZS41#:
AZS41# fused zirconia corundum bricks not only have the eutectic of silica and alumina, but also contain more uniformly distributed zirconia crystals. In the zirconia corundum brick system, its corrosion resistance is good. Therefore, the key parts of the glass furnace are selected so that the life of these parts is lower than other parts.
AZS41 is the product with the highest performance in the fusion cast AZS series. It has extremely high resistance to glass liquid corrosion and extremely high glass phase exudation temperature, and it has very low pollution to glass liquid. It is widely used in key parts of the hot spot of the glass furnace, such as the wall of the glass furnace, the corner of the feed opening, the liquid hole, the sill, the bubbling at the bottom of the tank, and the all-electric furnace.
Features of monofrax s-3 s-4 s-5 Fused cast zirconia corundum
bricks:
1. Raw material is corundum and baddeleyite eutecticum,high
compression strength
2.Top high-temperature capablility,excellent thermal stability.
3.Strong resistant erosion stability to the glass liquid
Technology
physical and chemical index of monofrax s-3 s-4 s-5 AZS bricks Fused cast zirconia corundum bricks
| ITEMS | AZS-41 | AZS-36 | AZS-33 | |
| ZrO2 (%) ≥ | 40.5 | 35.5 | 32.5 | |
| SiO2 (%) ≤ | 13 | 14 | 16 | |
| Al2O3 (%) ≥ | 45 | 49 | 50 | |
| Na2O (%)≤ | 1.3 | 1.4 | 1.5 | |
| Fe2O3+TiO2 (%) ≤ | 0.3 | 0.3 | 0.3 | |
| B.D. (g/cm 3 ) ≥ | 4 | 3.85 | 3.75 | |
| C.C.S (Mpa) ≥ | 350 | 350 | 350 | |
| Apparent density(g/cm 3 ) | PT/QX | 3.55 | 3.45 | 3.4 |
| ZWS | 3.9 | 3.65 | 3.6 | |
| WS | 3.92 | 3.78 | 3.7 | |
| Apparent Porosity (%) | 1.3 | 1.5 | 2 | |
| Refractoriness ( C) | 1730 | 1710 | 1710 | |
| 0.2Mpa Softening temp. under load( C) | >1700 | >1700 | >1700 | |
| Exudation temp. of Glass Phase( C) | >1430 | >1420 | >1400 | |
Corrosion Resistance of Glass Melt(mm/24h) | 1.1 | 1.2 | 1.3 | |
| Thermal Expansion(%), 100C | 0.8 | 0.8 | 0.8 | |
| Glass Phase (%) | 18 | 19 | 20 | |
Casting method of monofrax s-3 s-4 s-5 Fused cast zirconia corundum bricks :
Electrocast zirconia corundum block is made by completely melting the raw materials and casting it in a casting mold, which is cooled and solidified. The shrinkage caused by the volume shrinkage of this product during condensation is a matter of special attention when using it. The casting methods of fused zirconium corundum bricks are ordinary casting (PT), inclined casting (QX), non-shrinkage casting (WS) and quasi-shrinkless casting (ZWS)
Usage of monofrax s-3 s-4 s-5 Fused cast zirconia corundum bricks
Fused Cast zirconia corundum are widely used in glass melting furnace because the fused zirconium corundum brick is an important refractory material variety in modern glass melting furnaces. It is currently produced in a large amount in the world. It is a widely used refractory product. It has good resistance to glass erosion and resistance to rapid cooling and heat. The heat load performance is applied to all important parts of the furnace.
PT: The usual pouring method, the shrinkage hole of the product is
located in the lower part of the casting mouth, and it is mostly
used for the upper structure of the melting pool.
QX: The oblique casting method is adopted, and the shrinkage hole of
the product is offset to the lower end, which is mainly used as a
pool wall brick.
WS: Non-shrinkage casting, the non-shrinkage product of the
shrinkage hole part of the cast brick is mainly used, such as the
liquid erosion hole, the kiln sill, the corner of the pool wall,
the paving surface, etc.
ZWS: Quasi-free shrinkage casting, mainly used as pool wall bricks,
basically removing the shrinkage of the cast bricks, mainly used as
pool wall bricks.
Product Process
Why choose Us
1. Strong professional:
Our company has thirty years producing experience in refractory
product. Our manager will supervise on a various refractory' s
production materials, process control, quality supervision and
package delivery, and ensure the products are 100% qualified.
2. Annual exports:
Now we have gained a global sales network reaching Taiwan, Russia,
Mongolia, South Korea, Vietnam, Pakistan, Bulgaria, Finland,
Greece, Spain, Congo, Angola, South Africa, and Maldives, Jordan
and so on. The export figure is more than USD 4 million.
3. Production equipment:
Production and testing equipments are new, complete and automated
or semi- automated. Such modern facilities and equipments have
provided the fine technical guarantee for the production and
testing.
4. Testing equipment;
Our company's testing equipments as follows:
High Temperature RUL Tester
Bulk Density Tester
The Pressure Tester
Refractoriness Tester
Customer visit
Contact us
CASTABLE Monofrax S-3 Fused Cast Zirconia Corundum Bricks Component for Glass Furnace
Inquiry Cart
0