Wind Turbine Castings Main Carrier Casted Components Spheroidal cast irons EN-GJS-400-18-LT

Wind Power Castings Of Main Carrier Casted Components For Wind Turbine

The large wind power-used QT350-22AL ,QT400-18L grade nodular iron wheel hub with mass more than 12 t/piece was produced by using induction furnace melting,using furan sand for molding,adopting the pouring process with low pouring rate,pouring temperature of 1 340～1 360 ℃ and bottom gating system.

Guangda has specialized large-scale casting production lines, and strives to build a high-power wind power equipment industry base, and mass production of castings that meet various technical requirements. A full-chain wind power industry cluster integrating wind power equipment design, casting, processing, painting and transportation has been formed.

Wind power castings Description

Wind power castings test

• Material chemical composition test
• Material mechanical properties test
• Ultrasonic testing sound speed measurement
• Casting wall thickness test
• Ultrasonic test
• Casting blank dimensions test
• Metallurgical microstructure test
• Magnetic partice inspection
• Size test during machining and finished products
• Heat treatment technology curve
• Corrosion protection test
• EN10204-3.1 certificate
• Quality certifixation of raw material

Guangda castings products overview

One-stop castings delivery capability

About Guangda

Guangda is a professional manufacturer for the wind turbine parts including the wind turbine castings ,forgings and gear box parts . As we are an integrated steel manufacturer from smelting, forging,casting, heat treatment to precision smart manufacturing .We could provide rough blank or semi-finishing or finishing parts for the wind power industry .

We have deep cooperation with ZF, Mingyang ,DEC,Windey, Envision, NGC,Flender,Shanghai electric ,

CRRC etc.

• Factory, Custom Wind Turbine OEM/ODM Manufacturing
• Wind turbine base , wind turbine support , support base , wind turbine casting manufacturer
• large head cover,large wind turbine parts,large turbine parts
• Spheroidal Graphite Cast Irons
• On shore wind power turbine
• Off shore wind power turbine
• Wind turbine main carrier , wind turbine nacelle support , support base , wind turbine casting manufacturer

spheroidal cast iron manufacturer

spheroidal graphite cast iron

cast iron supplier

Zhangjiagang Guangda Special Material Co.,Ltd was established in 2003. We located in Jiangsu Province beside Shanghai. Act as the high-tech enterprises with high-quality special alloy materials as the core business belong to the "advanced iron and steel materials" industry under the strategic emerging industries supported by the state.

1. Headquarter Zhangjiagang 220.000㎡ 2. Rugao Base 420.000㎡

3. Zhangjiagang Precision Manufacturing Base 200,000㎡ 4. Deyang Base 350.000㎡

Guangda Main products.

1. Material :
Gunagda has formed more than 10 core technologies in material melting technology and has internationally advanced heat treatment production lines from smelting and forging. Annual capacity for high quality alloy ingot 500,000 tons .Guangda provide high quality gear steel, high quality die steel, special stainless steel, high temperature alloy, ultra-high strength steel and other new material products encouraged by the state.

2.Forgings:
Guangda provide different forgings of shaft ,gear blank , ring rolling, rough machining, heat treatment and finish machining. Our annual production capacity is 500,000 tons for various of free-die forgings, ring rollings .Guangda forgings are widely used in high-end equipment manufacturing industries such as new energy wind power, rail transit, mechanical equipment, aerospace, new energy power, gas turbine, Marine petrochemical, semiconductor chip equipment and so on.

3.Castings:
Our business mainly focuses on large casting equipment, and our products mainly include large wind turbine castings, large equipment and equipment castings, large plastic machinery castings, and large shell castings with a total annual capacity of 210,000 tons. We have formed a whole industrial chain of smelting, casting, machining and surface treatment, and our technology and cost control are leading in the world.

4.Precision machining parts:
Through continuous and high starting point technical transformation. Guangda has introduced world-class high-precision equipment for the gears manufacturing, established a complete quality management system and after-sales service network, and dedicated itself to providing users with high-quality products. Quality products and satisfactory service.​All products are manufactured with the most advanced and modern equipment of PAMA,Gleason,Danobat,Kehren,Nicolas,Pierto carnaghi and efficient technical team with an emphasis on cost effective production.Guangda pursues excellence & innovation with tight quality control & the most advanced technology in the industry.