Add to Cart
Factory Air Conditioner s used for indoor air conditioning under
various environmental conditions, and has multiple functions such
as cooling, dehumidification, heating, humidification, and
ventilation. Temperature control range: when the temperature is set
at 18-25°C, the control accuracy is ±0.5-1°C, the relative humidity
is set at 50-70%, and the control accuracy is ±5-10%.
Factory Air Conditioner Application
The unit has a variety of models to choose from, and can be widely
used in the air conditioning needs of electronic factories,
hospitals, pharmaceutical factories, printing factories, post and
telecommunications, banks, computer rooms, power supply and
distribution stations, communication stations and other buildings.
Technical Parameters
items | Hanging constant temperature and humidity | ||||
Model | Indoor Unit | G50TH | G71TH | ||
outdoor unit | TK-WB | TK71WB | |||
number of p | P | 2 | 3 | ||
Cooling capacity | kW | 5 | 7.1 | ||
Electric heating | kW | 7.5 | 15 | ||
indoor unit | air volume | m3 / h | 1150 | 1700 | |
External residual pressure | Pa | 50/0 | 50/0 | ||
noise | dB(A) | 52/54 | 54/56 | ||
Temperature setting range and control accuracy | 18~25℃±1℃ | ||||
Humidity setting range and control accuracy | 45~65%±5% | ||||
power | 220V/~/50Hz | ||||
Refrigerant | R410A | ||||
Power | kW | 0.06 | 0.08 | ||
heater | Type | PTC electric heater | |||
Power | kW | 3 | 6 | ||
Humidifier | Type | PTC electric heater |
Factory Air Conditioner Cooling principle:
When the refrigeration system is working, the high-temperature and
high-pressure R410 gas discharged from the compressor enters the
condenser and is condensed into a medium-temperature supercooled
liquid. After being throttled and depressurized by the expansion
valve, it becomes a low-temperature and low-pressure gas-liquid
two-phase mixture and enters the evaporator. It evaporates and
absorbs the heat of the air passing through the evaporator, so that
the air flowing through the evaporator can be cooled. After
vaporization, the steam is sucked by the compressor, so that the
cycle is continuous, so as to achieve the purpose of cooling.