FORCE COMPUTERS SYS68K/CPU-6 REV. 4.1 SYS68K/CPU 6 REV. 4.1

FORCE COMPUTERS SYS68K/CPU-6 REV. 4.1 SYS68K/CPU 6 REV. 4.1

Product Description:

Two serial connectors to simplify RS-485 multi-dropping and host communications Several analog or digital command interfaces: Indexing (absolute with the Homing feature, incremental, or
registration)10 Volt analog interface—position, velocity, or torque control Presets (from one to eight

binary inputs)—torque or velocity control Quadrature encoder digital interface—electronic gearing position follower Step/Direction digital interface—position control CW/CCW (step up/step down) interfaceposition control Operating mode override—alternate movement interface Host command digital

interface The ULTRA 100/200 drives host command protocol provides optional drive configuration using the drive serial communications interface. This powerful feature allows your controller to access all of the drive digital controls using sequences of ASCII characters. The protocol includes error checking to

ensure the integrity of the transmitted commands. In installations that have multiple axes, up to 32 ULTRA 100/200 drives can be addressed by a host computer. These drives communicate with the host
computer using a four-wire RS-485 serial interface. The host command protocol includes specific drive

addressing, which allows the host to communicate with all the connected drives concurrently.

Contact Information:

Contact:Miya ( manager)

Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )

Related Product Recommendation:

Advanced multi-processor design for leading-edge velocity loop bandwidth, fully digital current, velocity, and position loopsLarge-scale integration with custom ASICs and IPMs for performance and reliabilityA 16-bit A/D convertor for precise velocity command input Flash memory for simple field upgrades A

personality module to store setup parameters and simplify drive replacement Reduced component count for reliability Internally-shielded filters for electromagnetic compatibility (EMC) Four dedicated I/O plus eight user-selectable, optically isolated digital inputs and outputs (sourcing/active high):Two dedicated

inputs Two dedicated outputs Four user-selectable inputs Four user-selectable outputs Two analog inputs for external current limit Two analog outputs for variable monitoring or torque sharing The purpose of this manual is to provide the user with the necessary information to install, program, start up and

maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within.

SMC US24459 16-Port Pneumaatic Manifold NP420-DN1 Used Working

SMC US24239 8-Port Pneumatic Manifold Assembly EX160-SDN1 Used Working

SMC US25816 8-Port Pneumatic Manifold Assembly EX160-SDN1 Used Working

SMC US25817 16-Port Pneumatic Manifold Assembly NP420-DN1 Used Working

SMC LFU20-0250-DAN00243 Flow Controller AMAT 0190-32777 New

SMC SS5V1-DUO02365 9-Port Pneumatic Manifold AMAT 0190-38051 Used Working

SMC VJ3233T 5-Port Pneumatic Solenoid Valve Block VJ3133T Lot of 2 Used Working

SMC VV5Q11-ULB990274 10-Port Pneumatic Manifold AMAT 4060-00427 Used Working

SMC DeviceNet I/O Unit EX160-SDN1 Working

SMC VV5Q11-16-X1620 16-Port Pneumatic Manifold Used Working

SMC VV511-ULB000030 8-Port Pneumatic Manifold EX160-SDN1 Used Working

SMC VV100-49-X143 16-Port Pneumatic Manifold Used Working

SMC US22387 8-Port Pneumatic Manifold AMAT 0190-15945 Used Working

SMC US22387 8-Port Pneumatic Manifold Used Working

SMC VV5Q11-16-DAP00121 16-Port Pneumatic Manifold EX420-SDN1 Used Working

SMC REA32-Z2727-375 Pneumatic Sine Rodless Cylinder Lot of 2 Used Working

SMC VV5Q11-16-DAJ00773 16-Port Pneumatic Manifold AMAT 0190-24963 Used Working

SMC VV5Q21-ULB990061 8-Port Pneumatic Manifold Used Working

SMC VV5Q11-ULB970095 16-Port Pneumatic Manifold AMAT 4060-01101 Used Working

SMC VV5Q11-ULB990062 16-Port Pneumatic Manifold AMAT 4060-00006 Used Working

SMC LVM215-5BMO-X17 2-Port LVM Chemical Valve Lot of 6 Used Working

SMC US26344 32-Port Pneumatic Manifold Assembly NP420-DN1 Used Working

SMC SS5V1-DUP02984 32-Port Pneumatic Manifold AMAT 0190-41517 Used Working

SMC Flow Controller LFU20-1600-DAN00243 0190-3250S New

SMC US22829 16-Port Pneumatic Manifold AMAT 4060-00374 Used Working

SMC VV5Q11-14-DAK00811 14-Port Pneumatic Manifold AMAT 4060-00678 Used

SMC VV5Q11-14-DAK00810 14-Port Pneumatic Manifold AMAT 4060-00680 Used Working

Novellus 951479 Cable, motor power

Novellus 951337 Cable, motor power

2 PUV0047-5 power supply HOYA-SCHOTT, UV light source,

3 Banner D12SN6FP Fiber Optic sensor switch

Chemraz 9312-SC520, 2-312, Compound 520, 0.600 x 0.210 inch

Bearing, WFR Roller, MESA 2B-10-241, Used, Lot of 4

Nozzle FLT 80787-50 95Deg@500psi, Lot of two, New

7 RF Low freq silver plated connector AMP, 330830 = 5, 330830-8=2

SMC MDSUB7-90S-R73L Rotary Pneumatic Actuator AMAT 0520-00271 Lot of 2 New

SMC MY2HT16G-538-DCM1864M Rodless Cylinder Slide 3760-00353 new

SMC Manual Valve INA-24-63-04RD lot of 10 working

Hitachi S3-89146 SMC Air Cylinder CM2XL20-70 Qty 3 New

SMC IN587-07-A Gas Panel Communication Box 32-Port Manifold V114-5FZ-X6 Used

SMC REA32-Z2727-365 Pneumatic Sine Rodless Cylinder Lot of 3 Used

SMC In-Line Flow Bypass Valve VXD2150-06-1-X696 0190-34864 New

SMC 0190-18443 HE Thermal Fuse For Cold Loop New

SMC Digital Pressure Switch ISE5B-T2-26L ISE6B-A2-26L Lot of 8 Used Working

SMC NCDQ2B50-UIA980-090 Pneumatic Cylinder Lot of 3 Used Working

SMC KDM10-DUM02264 KDM One Touch Multiconnector AMAT 3300-13055 Lot of 8 New

SMC NCDQ2WB63-G0922-80 Pneumatic Cylinder Assembly Used Working

SMC 0010-26749 Gate Valve Actuator 300mm Rev. 002 Copper Exposed Used Working

BES-9239-33A SMC LPM Flow Switch Manual Valve AMAT 0910-28878 New

SMC NCDQ2B80-G0656-38 Pneumatic Cylinder Lot of 4 Used Working

SMC Thermo-Con High Lift Type Module INR-244-220A working

SMC 11GPM RAD 300 Flow Switch Assembly PF2W511-N10-1 New 0190-27970

SMC CDQ2B140C-J0406-XC Air Cylinder Hitachi 3-839273-^A New

SMC US447 24 Port Manifold Valve AMAT 0190-02046 Used Working

SMC SS0750-06-DAO00978 6-Port Pneumatic Manifold AMAT 4060-00846 New

SMC NCDQ2B50-UIA980090 Pneumatic Cylinder 3020-00317 lot of 4 working

The use of the product:

1.water, water treatment / environmental protection,

2.the elevator industry,

3.Experienced technichal support team.

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.

Moore Automation are still working and able to shipping worldwide. Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you. If you have any questions, please feel free to contact us. We can supply various automation parts. If you want to buy parts, please send the part model to my email and I will reply to you immediately after receiving it. Hope anyone enquire from us. We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system.

Distributed control systems, programmable controllers, panel controller and drive! * Our mission is to help you! * Reduced maintenance costs! We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help supporting your existing control systems. We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have undergone rigorous testing and certification!