Product Details
High Thermal Conductivity Alumina Ceramic Substrate High Heat
Resistance
1. Description
Alumina ceramic is widely used in many fields. Because of its great
performance, it is more and more used in curent society, alumina
ceramic substrate can meet the requirement of daily using and
specifical features.
Ceramic substrate refers to a special process board in which copper
foil is directly bonded to the surface of alumina (Al2O3) or
aluminum nitride (AlN) ceramic substrate (single or double) at high
temperature. The made of ultra-thin composite substrate with
excellent electrical insulation properties, high thermal
conductivity, excellent solderability and high adhesion strength,
and the same as the PCB can be etched a variety of graphics, with a
large current carrying ability. Therefore, the ceramic substrate
has become the basis of high-power power electronic circuit
structure technology and interconnect technology.
2. Main Features
1. Can be made into various of complex shapes, high dimension
accuracy.
2. Contact with flame directly,no odor and volatile gases at high
temperatures
3. High mechanical strength,resistance to gas flow.
4. Low shrinkage,low thermal conductivity.
5. Excellent strength in high temperature and thermal stability.
3. Specification
Item | Unit | 95% Alumina ceramic | 99% Alumina ceramic |
Bulk density | g/cm3 | >3.6 | 3.89 |
Max use temperature | ℃ | 1500 | 1700 |
Water absorbtion | % | 0 | 0 |
Bending Strength | Mpa | 364 | 450 |
Expansion (25-800°C) | (X10-6/°C) | 7.6 | 8 |
Thermal Conductivity | (W/(m.R)) | 20 | 35 |
Dielectric Strength | (kv/mm) | 11 | 12 |
Application:
1. High Power Power Semiconductor Modules; Semiconductor Coolers,
Electronic Heaters; Power Control Circuits, Power Hybrid Circuits.
2. Smart Power Components; High Frequency Switching Power Supply,
Solid State Relays.
3.Automotive, Aerospace and Military Electronics Components.
4. Solar panel components; telecommunications switches, receiving
systems; lasers and other industrial electronics.
Company Profile
Yixing City Kam Tai Refractories Co.,ltd is located in Yixing, the
Pottery capital of China. Our company is founded in 2006, it is a
professional refractory and ceramic company which cover research,
production, sales and after-sales service. Since establishment, we
adhere to principle of “Technological Innovation, Never Stop”,
continuously improve R&D and production process and equipment.
Moreover, we cooperate with famous university such like Liaoning
University of Science and Technology, Beijing University of Science
and Technology.
Main Products
We mainly manufacture industry furnace refractory material such as
Sic PLATE,Setter plate, Push plate, Pillar,Sagger, Technical
Ceramic, Furnace material and so on. Our product is widely used to
sinter Magnetic Material, Electronic Ceramic, Daily Ceramic, Powder
Metallurgy, Rare Earth Battery Material and so on. Our sandwich
setter plate, electronic ceramic used sagger, Lithium battery
cathode material sintering sagger are very good , and they have
been leader products in our field .
Company Vision
Since our establishment, we insist on “No best , Just Better” ,
aimed to be the top Supplier of Refractory material and Technical
Ceramic in the world.