Heavy Duty Material Molten Metal Handling Vehicles Anti Explosion 1-100T
Brand Name:PERFECT
Certification:CE, SGS, ISO
Model Number:BTL
Minimum Order Quantity:1 Set
Delivery Time:45 Days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
7th, Jiayi Oriental Pearl Building, Northwest of Xinzhong Road and Jinsui Road,Xinxiang, Henan
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
1-100T Heavy Duty Material Anti-Explosion Molten Metal Handling
Introduction
The Molten steel handling transfer cart is specially designed to
transfer the high-temperature ladle. This kind of car has strict
requirement on safety and ability of anti-high tem
perature,driving system and control of the car should be specially
designed .The rcation motor is designed in slowly start and stop to
reduce the inertia of the car and avoid molten steel or slag from
splashing . The heat insulating material is used in the car to
resist the high temperature . Usually two motors are prepared, so
when one is damaged by the ladles high temperature the other can be
used to continue the work. Generally the outer surface temperature
of the ladle is 200-300 degree , due to the high temperature, the
molten steel vehicles should be designed with heat exposure proof
device, especially to the cable, battery, motor, reducer and
electric appliance.
It can avoid the transport vehicle from damaging and shortening
using time. During the vehicle working, it must be steady travel,
steady start and slowly stop. In order to avoid the vehicle broken
during working, there equipped two sets driving system, if the main
driving system is broken, the spare driving system can be start at
the same time.
Application Sites
- The electric steel product plant transfer bogie is applied in steel factory to transfer heavy steel or aluminum coils. In order to avoid the steel coils falling down from the transfer bogie, we designed a V-frame. It can protect the coils security. We can recommend you the direction of the V-frame according to the coils.
- It is also used to transfer heavy material between workshops, such as large steel parts, large motor, etc.
- The electric steel product plant transfer bogie is usually used for ship assembling and ship maintenance. Due to the components of the ship are heavy and huge, they need a suitable plant transfer bogie to handling and transfer. The carrying capacity of our electric steel product plant transfer bogie ranging from 1-300 tons.
- It is also can be used in metallurgy for ladle and hot slag transfer for the advantage of stable start and high temperature proof.
Advantages of rail transfer vehicle
These are the advantages included in using Ladle Flat Trailer:
---Low noise: It causes low noise level.
---Maximum safety: Offers guarantee of maximum safety for operators and for the
material handled. We really care about the safety of everyone
involved in the job.
---Easy for operation: These vehicles are easy to drive, so as soon as you get it you will
be able to use it to transport your loads. We will support you to
make the best out of your Ladle Flat Trailer.
Main components
The principal structure of our electric steel product plant transfer bogie consists of cart frame, transmission gear (axle, drive motor, gear reducer), electrical appliance cabinet, cast steel wheels, safeguard system (warning light and horn, limit switch, buffer, railing guard, radar detector) etc.
Parameter Table
| Model | BTL-2t | BTL -20t | BTL -50t | BTL -100t | BTL -150t | |
| Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
| Table Size (mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
| Width(W) | 1500 | 2200 | 2500 | 2800 | 3000 | |
| Height(H) | 450 | 550 | 650 | 850 | 1200 | |
| Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 2000 | 2000 | |
| Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
| Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 | 0-18 | |
| Motor Power(kw) | 0.8 | 2.5 | 5.5 | 11 | 15 | |
| Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
| Reference Weight(t) | 2.3 | 5.5 | 7.6 | 13.9 | 26 | |
| Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 | |
Company Strength
Henan Perfect Handling Equipment Co., Ltd is devoted to research and manufacture material handling equipment. We provide and design handling solutions to meet workshop transportation, material grading and transferring need. Our products have a wide application field including metallurgy industry, machinery manufacturing industry, mine industry, power industry, automobile assembly industry, food, pharmacy, shipyard, pigment, ceramics, chemical etc;
Our company located in Guandi Development Zone, Xinxiang, China and covered an area of 30,000 square meters. Rich design experience engineers and professional manufacturing personal take you high quality product and service. Our products have been exported to Countries, such as USA, Germany, Netherlands, Thailand, Saudi Arabia, South Africa etc.
Heavy Duty Material Molten Metal Handling Vehicles Anti Explosion 1-100T
Inquiry Cart
0