Add to Cart
Aluminum Frame Hanging Accordion Wooden Partition Walls Philippines
How to operate the wooden partition walls
First, how to open a multi-screen wooden partition walls routine
operation should be gentle, and should pay attention to safety.
Facing the screen station, use both hands to grab the screen and
pull the screen in the direction of the rails; turn the screen in
the direction of the rails.
After pushing the screen to its place, fix the screen. Tip: When
pushing the wooden partition walls to the intersection, you should
pay attention to the direction of the rail, and then gently push
the screen along the rail to the position where it should be
placed.
Second, how to fix a multi-directional wooden partition walls
Hold the screen with one hand, and put the handle into the
hexagonal steel at 1100mm on the side of the screen, grasp the
handle and turn it 180 degrees clockwise (or shake it
continuously); the inside of the screen will pop up. Fix the
screen.
Insert the handle into the groove on the side of the screen, and
pull the handle upwards to open the expansion screen inside the
screen to fix the screen. After putting the entire group of
screens, check if the screen is straight? Whether it is on the same
plane as the rail, if not straight, retract the upper and lower
expansion seals and adjust until the screen is straight.
Third, how to operate multi-directional telescopic panel screen
Usually the last side of each group of screens is a retractable screen. Push the screen to the position where it should be placed. Then move the handle up and down inside the side material groove to pop up and down the active seal, and then put the handle on the screen. In the operating hole on the surface of the telescopic screen, rotate counterclockwise until the side telescopic aluminum plate is pressed against the wall.
The details of installing the wooden partition walls
(1)Size of wall: all the folding partition wall panels should be
installed in accordance with the manufacturers recommendations.
(2)Cutting: all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor.
(3)Install the acoustic panels: the installation of acoustic panels
should be carried out in a sequence from the left to the right,
from upside to downside, the panels are cut to fit on site,
traditional woodworking tools are suitable for cutting the panels,
if panels are cut using a fine tooth table saw the panels should be
cut face up to avoid scratching and at a much slower speed to avoid
any tearout or chipping.
(4)Fix on keel:
Wooden keel fixing using nails, staples or screws into prefixed
timber battens on the walls via the tongue and groove joint.It also
can fixing by: light steel keel.
Description of the whole system | |
Item | movable partition systems |
Partition Height | 2-17 meters |
Sound Transmission Class(STC) | 32-55db |
Description of accessories | |
Roller | Imported dupont POM material roller,bearing capacity 225-1300kg |
Track System | Clear anodized 6063-T6 aluminum double track |
Surface finish option | MDF,plywood, melamine,HPL,fabric,PU,wood veer, mirror steel ect. |
Junction | "T"junction, "L" juntion, cross/ "X" juntion |
The advantages of wooden partition walls
No floor rails: Top hung system without the need for a floor track
Stable and safe: Stable and reliable after the partition, easy to
swing
Sound insulation: Sound insulation effect, the maximum sound
insulation up to 570B, we can offer various levels of sound
reduction
Insulation energy saving: Excellent insulation performance,
according to different seating rate, the large space is divided
into small space to reduce air conditioning power consumption
Efficient fire: The use of highly efficient fire prevention
materials, fire performance is good
Retractable and flexible: Retractable top and bottom seals ensure
effortless movement of panels, numerous panel stacking options for
complete flexibility,only a person can complete the whole process
of cutting off.