Double Skin 1/2 Rows Heating Coil 7-1300kw Custom Air Handling Units Ith 30/50 Mm Insulation

Double skin 1/2 rows heating coil 7-1300kw air handling units with 30/50 mm insulation

EKDM air flow range is from 1000m3/h to 400000m3/h. Available functional sections include fresh/return air mixing section, cooling section, heating section, primary/medium/high efficiency filter section, electric heating section, humidifying section, sound attenuation section, heat recovery section, secondary air-return section, fan section, air diffuser section etc. Different combinations can meet different air handling requirements.

• The surface of the unit is made of quality color steel, which can resist corrosion, scratch and ultraviolet radiation.

• Internal panels are made of steel plates galvanized with aluminum and zinc, with an assured service life of more than 15 years. All panels feature end-to-end joints and smooth surfaces, without any bur or corroded point.

• The internal panels feature reinforced design, which is strong enough to support the largest air handling unit.

• The unit panel has two thicknesses, namely 30mm and 50mm.Inside the panel, hermetically foamed polyurethane (no fluorine) with a density of 48kg/m3 is used as the heat- insulating material. The heat conductivity factor is less than 0.02W/m°C.

• Each functional section of the unit is equipped with a steel trough base, thus ensuring it is well supported, easy to transport and assemble. The overall robustness of the unit meets the standard of CEN2.

The unit features a special clamp structure, facilitating disassembly and maintenance as well as ensuring low air leakage. When the internal negative pressure is 1000Pa, the air leakage is below 1% (level B air leakage of European standard EN1886).

• The unit panels are coated with strong and heat-insulating UPVC plastics, thus avoiding direct contact between heat-conductive parts. With a heat-insulation grade of T1 (European standard), thermal bridge and cooling capacity loss are completely eliminated.

Specifciations

Note:
■ Temperature of heated inlet water: 60°C; temperature drop 10°C.
■ Fresh air conditions for heating operation: inlet air temperature 0°C; return air temperature 21°C.
■ Coils are copper pipes with aluminum fins (12 fins/inch). EK can provide coils with 8~14 fins/inch.

EUROKLIMAT (EK) was established in 1963 in Italy. For the past half a century, it has become famous as an energy-saving air-conditioning manufacturer in Italy and globally. Continuous innovation, new product development and top manufacturing quality are the driving force behind this growth.

EUROKLIMAT (EK) pursues the ideals of protecting the environment, providing physical comfort and adopting energy-saving into the whole process of product R&D, manufacturing and service. Our products covering residential, commercial and close control air-conditioner are manufactured according to the global generally accepted standards.