200 X 300 X 1 MM Carbon Fiber Sheets 100% 3K Twill Matte Carbon Fiber Plate Board

200 X 300 X 1 MM Carbon Fiber Sheets 100% 3K Twill Matte Carbon Fiber Plate Board

Our Carbon Fiber Board is a lightweight, high-strength, and durable composite material designed for demanding applications. Manufactured using premium-grade carbon fiber and advanced resin systems, it provides exceptional stiffness, impact resistance, and an attractive high-tech appearance.

About this item

• Twill Weave - This carbon fiber is a twill weave with a matte surface that conforms more easily.
• 100% Real Carbon Fiber - High-quality carbon fiber materials texture which is durable and not easy to tear.
• 3k Carbon Fiber Cloth - This 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle.
• Wide Application - Accessories for kite or airplane models, car exteriors and interiors surfaces, car door handles, cellphone, laptop, drones, etc.
• 100% Satisfaction - A wonderful service will be provided after contacting us if you are have questions with our carbon fiber sheets.

What is a Carbon Fiber Board?

A carbon fiber board is a rigid composite sheet made from carbon fiber-reinforced polymer (CFRP). It consists of multiple layers of carbon fiber fabric infused with resin, which are then compressed and cured to create a lightweight yet extremely strong and stiff material. Carbon fiber boards are widely used in industries that require high strength, low weight, and durability.

Key Properties of Carbon Fiber Boards

• High Strength-to-Weight Ratio – Stronger than steel but significantly lighter.
• Exceptional Stiffness – Minimal flex and deformation under load.
• Corrosion & Chemical Resistance – Does not rust or degrade like metal.
• Thermal Stability – Withstands extreme temperatures without losing strength.
• Aesthetic Appeal – Sleek, modern appearance with matte or glossy finishes and 3K twill/plain weave patterns.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.