3K Twill Matte Surface Strong Strength And Light Weight Full Carbon Fiber Sheets

3K Twill Matte Surface Strong Strength and Light Weight Full Carbon Fiber Sheets

LIJIN premium quality carbon fiber sheet manufactured using 100% high-strength carbon fiber reinforcement and epoxy resin with a smooth, glossy, cosmetic quality carbon fiber finish on both sides.

Lightweight: Carbon fiber is 5 times lighter than steel (ASTM-A1008) and almost 2 times lighter than aluminum when comparing similar-sized pieces.

High Strength & Stiffness: Carbon fiber reinforced polymer (CFRP) has the highest specific strength and modulus (stiffness) per density compared to metal, plastic, and wood.

Low Thermal Expansion: When metal is exposed to heat, it will expand and weaken which can cause issues and possible failure of the part. Carbon fiber has low thermal expansion.

Low Thermal Conductivity: Metal acts as a conductor, aluminum more than steel, which can transmit or radiate heat to its surroundings and cause heat soak. Carbon fiber has low thermal conductivity.

RF Shielding: Carbon Fiber works well to attenuate, or block radio frequency waves, protecting your devices from scanners or people trying to access your data.

Features

【 High-Quality Material】The matte carbon plate panel is fiberboard material that is durable and sturdy enough, wear-resistant, and provides a long service life. The carbon fiber plate is made of high-quality carbon fiber material, it is very strong, lightweight, durable, and has a long service life.
【Twill Weave】This carbon fiber is a twill weave with a matte surface that conforms easier. Suitable for processing into model aircraft boards, advanced fixed-wing, notebook panels, brackets, helicopter brackets, toy car chassis, mobile phone protective covers, etc.
【Light weight and high strength】The most noticeable advantages of carbon fiber products are lightweight and high strength. Compared with steel plates, the quality of carbon fiber plates is only 1/4 of that of steel plates, but its strength is 7 to 9 times that of steel, and its tensile modulus of elasticity is also stronger than that of steel.
【Wide Application 】The carbon fiber plate has a smooth surface, accurate shape, and good symmetry; and has good overall and local rigidity, high strength, fatigue resistance, durability, fatigue damage resistance, and high reliability of the body; especially applicable for multi-copter, helicopter and RC airplanes.
【Customer Support】We have /1MM/2MM/3MM thickness sheets chosen, please check the finish of the surface after receiving the goods, if you have any questions please contact our customer service team, we are happy to solve them for you.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.