100% Carbon Fiber Board 1.5mm X 500mm X 500mm - CFRP Sheet

Durable 100% Carbon Fibre Board – 1.5mm x 500mm x 500mm - CFRP Sheet

LIJIN Composites carbon fibre sheets are manufactured using 100% high-strength carbon fibre reinforcement and epoxy, cured under a strictly controlled process to produce the highest standard of a carbon fibre sheet. Enhanced Composites Carbon fibre plates are suitable for fully structural applications whilst also having a class-A (cosmetic), pinhole-free finish on both sides.

Both surfaces of the sheet use a high-quality 1×1 plain carbon fibre, 3k woven carbon fibre fabric with a gloss finish. After the curing process and before cutting or stocking, the sheets are coated in a high-quality protective film on both sides to ensure they remain in pristine condition.

Buying high-strength carbon fiber sheets?

Do you want to buy high-strength carbon sheets? They are easy to order through our website with fast delivery throughout Europe.

Datasheets

If you require any extra information about the technical specifications of our products, we can provide you with datasheets for almost all our carbon sheets. All the data we currently have available can be found in the datasheets. If you’re looking for more technical information about the standard products and it’s not in the datasheet, then we don’t have that data currently available. Feel free to contact us here about custom requirements for your application.

What is carbon fiber?

We are specialized in the processing of carbon fiber, combined with epoxy resin. The lightweight products of CarbonWebshop are extremely suitable for large mechanical loads due to their strength and rigidity. Carbon composites can replace other materials such as steel and aluminum. Composite is an anisotropic material. Unlike metals, the mechanical properties of composite vary in different directions. This allows carbon composites to be used for various applications. With a good design, a carbon construction can be as much as 40-70% lighter compared to aluminum. Want to know more about carbon fiber-reinforced plastics (CFRP)? Feel free to contact us here.

Applications of carbon fiber

Carbon fiber uses can vary per industry. Carbon is mostly used in the following industries: drone/UAV, aerospace, defense, machine/product handling, grippers, robots, and more.

Single-Sided Carbon Fiber Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.