Woven Finish Roll Wrapped Carbon Tube 30mm OD 28mm ID 1000mm Length

Carbon Tube Woven Finish Roll Wrapped Tube 30mm OD, 28mm ID, 1000mm Length

High strength roll wrapped carbon fiber tubes with a glossy, woven carbon fiber finish make them a great choice for a huge range of both structural and cosmetic applications including drones, UAVs, camera rigs, automation, tripods, lightweight structures, and much more.

Roll-wrapped carbon fiber tubes are universally strong and can tolerate all forces equally. Unlike carbon fiber pultruded tubes they can withstand twist (torque) force, compression, tension, and deflection without splitting. This is because the fibers have been wound around the diameter of the tube as well as running lengthways. First, the tube mandrel is wound with unidirectional carbon fiber around the diameter, then it is wrapped with the fibers running the length (longitudinally), finally, it is finished with a wrap of 3K twill before it is cured in an autoclave, roll sanded and recoated with epoxy.

Carbon fiber roll-wrapped tubes are ideal for all kinds of construction projects that require a lightweight performance sporting tube that can deal with forces from any direction.

These high-performance, roll-wrapped carbon fibre tubes have a glossy, woven carbon fibre finish making them ideally suited for use in applications where they will be seen. With the classic appearance of 2/2 twill carbon fibre together with a 100% roll-wrapped prepreg carbon fiber construction, these tubes are not only designed for demanding mechanical applications, they also look fantastic, adding a distinctive carbon fibre appearance to any application.

Roll wrapped fibre tubes are manufactured using alternating layers of high strength unidirectional carbon fibre running both length-ways down the tube for stiffness, and at 90° around the tube to provide hoop strength. As a result, while pultruded carbon fibre tubes have good longitudinal strength, roll wrapped tubes are preferable for applications where the tube may be subject to a variety of forces including bend, twist and crush.

Typical applications include model-making, engineering and automation, robotics and UAVs, recreational and sporting equipment and lightweight structures. If you have a requirement for machined or finished carbon fibre components please ask the Plastock team for more information.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.