Carbon Fiber Square Tube 3k Twill Matte / Glossy Rectangular Carbon Fiber Tube

Carbon Fiber Square Tube 3k Twill Matte/Glossy Rectangular Carbon Fiber Tube

Carbon fiber is a new kind of high-strength and high-modulus fiber material with more than 95% carbon content. The tensile strength is 7-9 times that of steel. Carbon fiber board is made of carbon fiber which is arranged in the same direction and is impregnated and hardened by resin to form carbon fiber board. Using high-quality carbon fiber raw materials and good basic resin, carbon fiber sheet with high tensile strength, corrosion resistance, seismic resistance, impact resistance and other good properties.

Carbon fiber is a new material with excellent mechanical properties. It's less than a quarter the weight of steel. The tensile strength of carbon fiber resin composites is generally above 3500MPA, 7 ~ 9 times of steel, and the tensile modulus of elasticity is 23000 ~ 43000Mpa. Therefore, the specific strength of CFRP, that is, the ratio of strength to density of CFRP can reach more than 2000 MPA / G / cm 3, while the specific strength of A3 steel is only about 59 MPA / G / cm 3, and its specific modulus is also higher than that of steel.

Roll wrapped prepreg carbon fiber tubes are constructed using multiple wraps of twill and/or unidirectional fabrics. Rolled tubes are ideal for applications that require the highest bending stiffness and lowest weight, such as automation robotics, telescoping poles, idler rollers, and UAV components. The standard finish is cello-wrapped gloss, but a smooth sanded finish is also available.

CARBON FIBER FEATURE:

• Corrosion resistance
• Abrasion - resistance
• Impact resistance
• Non-magnetic electromagnetic
• Excellent fatigue resistance
• Good resilience
• Convenient to pack and transport

Surface Effects:

There are 4 kinds of surface effects to choose from, 3K Plain Light, 3K Plain Matt, 3K Twill Light, 3K Twill Light, intensity, specific purchase according to customer preferences to buy.3K texture three-dimensional effect is strong, clear, with high-grade, gorgeous appearance.

Application Fields:

Plant protection aircraft, aerial photography, unmanned aerial vehicles, Multirotor, model aircraft, mechanical equipment, medical equipment, pens, 3D printers, bicycles, fishing rods, robots, mountaineering poles, military equipment, arrowheads, racing

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.