3K Plain / Twill Weave Carbon Fiber Sheet Glossy / Matt Carbon Fiber Plate

3K Plain/Twill Weave Carbon Fiber Sheet, Glossy/Matt Carbon Fiber Plate

A plain carbon fiber plate, also known as a plain weave carbon fiber plate or sheet, is a flat, rectangular structural component made entirely from carbon fibers with a plain weave pattern. This type of carbon fiber plate is characterized by its distinctive checkerboard-like appearance created by the intersecting carbon fiber strands.

The plain weave pattern of the carbon fibers adds both visual appeal and strength in multiple directions, making the carbon fiber plate highly versatile and suitable for various engineering and design applications. When selecting a plain carbon fiber plate for a specific project, it's essential to consider the required dimensions, thickness, and other design considerations to ensure it meets the intended performance and structural requirements.

Our Carbon Fiber Panels are constructed with the same certified carbon fiber that is currently used in state-of-the-art aircraft and sailing yachts. With the use of certified T-300 carbon fiber fabric, all of our carbon fiber panels are made to the highest standards in both manufacture and material.

Carbon fiber panels have physical properties that are similar to steel. However, the stiffness of carbon fiber is superior to that of an equivalent piece of steel while also remaining much substantially lighter and is similar to plastic in weight. This gives the carbon fiber panels a much higher strength-to-weight ratio by comparison.

Typical Uses

• Motorsport / Marine / Light Aircraft
• Engineering / Automation
• Displays / Exhibitions / Shop- Fitting
• Cabinets / Enclosures / High-End Audio
• Further processing into sandwich panels

Advantages

• Pin-hole-free high-gloss cosmetic surface.
• 100% high-strength carbon fiber reinforcement throughout.
• A wide range of thicknesses and sheet sizes are available.

To create a more uniform distribution of strength, all Enhanced Composites sheets are manufactured using layers of 0°/90° and 45°/-45° oriented reinforcement in what is known as quasi-isotropic fiber orientation. Carbon fiber sheets using this layup technique offer improved stiffness across their diagonal axis and significantly improved torsional stiffness.

All panels are made with a high-performance epoxy resin that offers excellent mechanical functions, clarity, and improved UV stability, however, we recommend a UV-stable coat to prolong the grade-A finish. An elevated post-cure temperature is applied to increase the mechanical strength of the panel, resulting in a higher Tg and enhancing the inter-laminar sheer strength.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.