High Strength Carbon Fiber Board Sheet Scratch Resistance 3K

High Strength Carbon Fiber Board Scratch Resistance 3K Carbon Fiber Sheet

Our 3k carbon fibre sheet and the plate are manufactured using only genuine 100% 3k 2×2 twill carbon fibre fabric layers the whole way through the thickness. The carbon fibre is infused with a Lloyd’s Approved epoxy resin creating a high stiffness, high strength, lightweight and aesthetically pleasing material.

Monolithic PREMIUM 3k carbon fibre sheet and plates offer excellent mechanical performance and machinability over STANDARD 12k and INDUSTRIAL 48k. Utilize a 3k carbon fibre sheet when your application demands the highest possible mechanical performance and best machining characteristics. If your application requires an excellent balance between cost and performance then consider our STANDARD 12k range which maintains good mechanical performance and machinability at a much-reduced cost where you can also select a 3k face sheet option.

The sheet possesses a mirror-like gloss finish on one side and a texture/matt finish on the other to enable optimum bonding. The gloss side of all our carbon fibre sheets is covered in a removable protective film that will help prevent marking/scratching and maintain the glossy surface finish when you’re cutting and finishing the sheet for your application.

Why are there diffrenent weaves of carbon fibre fabric?

Carbon fiber comes in different weaves optimized for different uses. For example, the standard twill weave is a good all-purpose fabric. Unidirectional fabric is good for adding strength and stiffness in one direction. Plain weave is good for delicate layups and some patterns are just designed for a unique look!

All 3k carbon fibre sheets and plates have a glass transition temperature of 90oC i.e. maximum use temperature, where if a higher temperature is required please shop for our HI-Temp range.

Cutting, Shaping & Finishing

Carbon fibre laminates can be cut with CNC routers, waterjet, and manual methods with appropriate cutting tools. We recommend carbide tools, abrasive-type cutters, or diamond-coated tools. Our carbon fibre sheets are easily edge sanded by hand or belt sanders allowing you to trim close and sand to final dimensions for a smooth and clean edge.

Carbon Fiber Plate Sheet Specification:

Products Display:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.