Glossy Carbon Fiber Sheet Hard Material For RC Car / Drone Frame

Carbon Fiber Sheet Hard Material for RC Car/Done Frame with All Thickness

LIJIN offers a wide variety of carbon fiber composites. Our carbon fiber sheets and plates are multiple laminations of carbon in an epoxy matrix. No matter what your application, LIJIN has the right composite sheets and plates for your needs.

LIJIN Twill/Uni prepreg carbon fiber sheets are our stiffest and strongest flat material option for structural applications where minimum weight is essential. These sheets are made from uni-directional prepreg for the majority of the thickness, but with a layer of twill prepreg on the outside surfaces. The final product has a satin twill finish on each side, giving it the classic carbon fiber look, but the strength and stiffness of a uni prepreg sheet. From military to industrial robotics to scientific equipment, our proprietary processing methods result in high fiber volume, no-crimp, extremely low void fraction carbon fiber sheets suitable for the most demanding missions. Available in quasi-isotropic or 0/90 degree uni orientations.

What is the difference between a carbon fiber sheet and a carbon fiber plate?

Both terms can apply to carbon fiber. The term sheet implies a thin light material like a sheet of paper, whereas plate implies a heavy thick material like a 3/4 inch steel plate. We feel that the sheet is more appropriate for carbon fiber because carbon fiber is typically lightweight and is typically used in thin sections due to its tremendous strength. On the other hand, we produce 1 ½ in carbon fiber that would definitely be considered plate. Both terms appear on our website because people will use them interchangeably.

Specification Summary:

• Carbon fibre 2/2 Twill 240gsm
• Mirror gloss finish
• Scratch protection film
• Multiple uses for road car and motorsport applications

Recommended Applications:

• Marine: Interior trim pieces, cabin interior design, covering vents, hatches, etc.
• Automotive: Ideal for door card replacement for rally cars.
• Consumer: Advertising and signage decals, architectural decorative veneers, splashbacks, etc.​

Product Features:

• 100% high-quality pure carbon fiber (aka full carbon).
• Pin-hole-free high-gloss cosmetic surface.
• Flat, textured bonding surface on the reverse.
• A wide range of thicknesses and sheet sizes is available.
• Offer CNC cutting service according to your design drawings, Cut to dimensions with CNC machining center – which ensures stable and precise dimensions.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.