Customized 3K Twill Carbon Fiber Tube Roll Wrapping Large Diameter

Large Diameter Carbon Fiber Tube Customize 3K Carbon Fiber Pipe

Our tube is roll tube (Filament winding Technology), not pultrusion tube, roll tube was have the longitude and weft yarn, but pultrusion tube only have the longitude, not weft yarn, so, the strength not as well as roll tubes. Carbon fiber is very light weight, the strength is steel's 9 times, but weight was about 1/3 of steel!

A composite tube is manufactured from two or more constituent materials. Individually, these materials have significantly distinctive properties. These properties could be either physical or chemical, and when these materials have been combined by the Composite Tubes manufacturer, the result is a composite material with characteristics unconventional to that of either of the individual components. The preference for composites comes down to several reasons. It could be their lower cost, or higher strength or even their lighter weight. One of the most primary applications for a Composite Tube is its use in structural purposes for buildings, bridges and construction.

Feature

• High strength/Light weight.
• Less Density
• High pressure resistance /Abrasion-Resistant
• Good chemical resistance/Good heat resistance.
• Fatigue resistance

Applications

• Automotive
• Light Aircraft Tubing
• Construction
• Duct rod / Fish Rods
• Aerospace Instrument & Interior Supports
• Photography & Sound Booms
• Outer Space & Terrestrial Antennae Supports
• Corrosion Resistant Equipment Marine
• Sporting Goods
• Oil & Gas
• Robotic Arms & Supports
• Power Generation
• Window Shades
• Wastewater Treatment
• Advertising Panels

OUR ADVANTAGES:

COMPOSITE TUBE MANUFACTURE
We can manufacture custom carbon fibre tubes to supplied specifications or use in-house composite tube design facilities to make tubing optimized for customers' applications. Learn more about our manufacturing capabilities.

COMPOSITE PART MANUFACTURE
We can manufacture and supply carbon fibre parts. With our heated platen presses, we manufacture composite sheets in-house and can mould parts with complex geometry using closed mould techniques.

STANDARD TUBING
As carbon fibre tube suppliers, we make ranges of standard carbon fibre tubing available straight from stock to suit a whole range of applications. Have a look at our full standard tubing range here.

TELESCOPIC TUBING
LIJIN is are a leader in the design and manufacture of composite telescopic tubes. This is one of the most established areas of our business. Learn more about our depth of expertise in producing both custom-made and standard carbon fibre telescopic tubing sets here.

MACHINING AND ASSEMBLY
Using state-of-the-art CNC machinery we can perform post-machining operations on composite tubes and parts. We can manufacture and sub-source additional components to provide part or full assemblies.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.