Matt Carbon Fiber Plate 3K Plain Weave For Industry

3K Plain/Twill Weave Carbon Fiber Sheet, Glossy/Matt Carbon Fiber Plate

Whether you’re making your own drone frames, car chassis, firewalls, bulkheads or any other custom designs that require high strength, lightweight material, these quality carbon fiber sheets are more than up to the task. Aerospace and space were some of the first industries to adopt carbon fiber. The high modulus of carbon fiber makes it suitable structurally to replace alloys such as aluminum and titanium.

These high-quality carbon fiber sheets plate come in various sizes, made from 100%, 3K plain weave, carbon fiber and finished with a matt surface on both sides. Unlike many low-cost carbon sheets that are made by pressing two outer skins of carbon fiber over a carbon and resin core, these plates are made with layered sheets of carbon fiber and resin, making them the same strength all the way through.

Whether you're making your own drone frames, car chassis, firewalls, bulkheads or any other custom designs that require high strength, lightweight material, these quality carbon fiber sheets are more than up to the task.

Features:

• Made of Carbon Fiber material
• Very Strong and Light
• Smooth finish
• High Tensile Strength
• Excellent quality
• Resistance to ultraviolet light.
• Anti-aging and corrosion resistance.

Application

1. Aerospace, RC model parts Helicopters Model Drone, UAVS

2. Decoration parts for Car and jewelry

3. Manufacture fixtures and tooling

4. Industrial automation and robotics

5. Sports equipment

6. Musical instruments

7. Scientific apparatus

8. Medical device

9. Others

Carbon Fiber High Gloss Woven Sheets are manufactured using a proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber laminates possible. These laminates are cured at a high temperature and pressure. Unlike vacuum bagging, which only generates a maximum of 14 psi, this Autoclave process cures laminates at 100 psi and 275° F. This high gloss panel is an outstanding decorative laminate with a deep, glossy, three dimensional finish. These 1st quality panels are manufactured with a clear, resin-rich carbon pre-preg resulting in a smooth, low porosity laminate with a mirror-like finish. A clear coat is not necessary to enhance the surface appearance of this laminate.

Single-Sided Carbon Fiber Plate Specification:

SHANGHAI LIJIN IMP.&EXP. CO., LTD is a professional manufacturer of carbon fiber and fiberglass products, dedicated to designing, developing, producing, and sales of composites products for more than 10 years. Our main products include carbon fiber tubes, carbon fiber rods, carbon fiber molding products, fiberglass rods, fiberglass pipes, etc. We constantly diversify and expand our capabilities to meet an extensive assortment of composite applications.

Our product line consists of various sizes and shapes of pultruded fiberglass/carbon (GFRP/CFRP) composite rods, tubes, bars, strips, complex profiles, and pull wound tubes for kites, sails, umbrellas, tents, golf bags, fence systems, nursery stakes, transformers, tool handles, antenna rods and enclosures, ladder rails, brushes, toys, pet products as well as for tripods, flags poles, ski poles, insulators, gratings, composite rock bolts, fiberglass/carbon rebars, etc. Any combination of different reinforcements such as fiberglass, carbon fiber, fiberglass/carbon fiber hybrid, and resin matrixes such as polyester, vinyl ester, epoxy as well as various colors are available.

If you are interested in our products, please feel free to contact us.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.