Matte Carbon Fiber Sheets 3K Twill Weave Plate Panel 15mm

Carbon Fiber Sheets, 400X500X3MM 3K Twill Weave Carbon Fiber Plate Panel (Matte Surface)

Dimension: 400X500mm, thickness: 3.0mm
Material: 100% pure carbon fiber with no other fillers/composite layers.
Surface: 3K Twill Weave, Matte Finish.
Features: These carbon fiber sheets contain 100% carbon fiber imported from Japan, Strong Strength, and Light Weight.
Perfect for any application including RC, drones, helicopters, quadcopters, multi-copter, etc.

3K Full Carbon Fiber Sheet(Twill Weave, Matte Surface)

This carbon fiber sheets contains 100% carbon fiber imported from Japan, Strong Strength and Light Weight. The surface is 3K twill weave, matte surface without any glass fiber contents. The plate panel can be used to construct strong structures, create supports, or for fabricating your own parts! It is specially applicable for Multicopter, Helicopter and RC airplanes.

Product Specifications

Item Name: 3K Full Carbon Fiber Sheets
Dimension: 400X500mm
Thickness: 3.0mm
Material: 100% pure carbon fiber with no other fillers/composite layers.
Surface: 3K Twill Weave, Matte Finish.

Features

This carbon fiber sheets contains 100% carbon fiber imported from Japan, Strong Strength and Light Weight.

Application

Widely used in RC model, aviation model plane, multicopter, helicopter, FPV, UAV, light axis with stents, PC equipment, etching machine, sports equipment, decorating parts and so on.

Features:

1. Anti-UV.
2. Light weight.
3. High strength, good flexibility.
4. Wear-resistant, impact-resistant.
5. Anti-aging and corrosion resistance.
6. Ideal material for contoured or angled cuts.
7. Apply to medical instruments, cars material, sports goods.
8. Can effectively solve the difficulty of multilayer carbon fiber percolation cloth and the problem of large quantities, reinforcing effect is good, construction is convenient.
9. Used to reinforce concrete floor, bridge plate reinforcement reinforcement, concrete, brick masonry wall, scissors wall reinforcement, bridge pier, pile, such as column, chimney, tunnels, pool, reinforce the reinforcement concrete pipe, etc.

Single-Sided Carbon Fiber Plate Specification:

FAQ:

1. Are you a factory or a trading?

We are a factory, with more than 16 years experience in composite products. We are one of the top manufacturers of carbon fiber tubes in China.

2. Can you send us a sample to check?

Yes, we can send you a free sample to check. You can pay the freight costs. When you place an order, we will return the freight cost to you.

3. What about the terms of payment?

T/T, L/C, Western union, etc

4. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry.

5. What’s the difference between Chengcheng and other factories?

We have our own technology and research team. Our products strictly follow the quality control system in the composite products field.

6. Do you provide OEM service

Yes. OEM is welcome. We can make molds according to customers’ drawings and samples

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.