500mmx500mm Matte Plain 3K Carbon Fiber Panels For Quad Frame

500mm x 500mm Matte Plain 3K Carbon Fiber Plate Panel Sheet for Quad Frame

Our high-gloss carbon fiber sheets are made of 100% genuine carbon fiber, using a 2x2 twill weave fabric. One side of the carbon fiber sheet carries a mirror-like high gloss finish, while the back is pre-textured to bond to any surface, using the optional 3M high-performance double-sided adhesive (arrives unattached). The finish is perfect for high-end decorative applications. Please see below for more information on each carbon fiber sheet's thickness to better understand what makes sense for your application.

Our focus is manufacturing high-quality materials that you can count on to perform consistently in high-performance applications subject to extreme conditions. All carbon fiber plate you find online is not equal. Material selection and plate manufacturing methods will ultimately determine the material strength and stiffness. We manufacture this plate using high-performance materials and high-quality manufacturing methods. Backed by years of experience and thousands of hours of research, we remove the guesswork so that you can rest assured you will end up with quality parts at a cost you can afford. These panels leave the mold with a beautiful high gloss surface on one side and a matte finish on the other side for bonding.

Panel Specifications

• Fabric: Carbon Fiber
• Weave: 2x2 Twill
• Panel Density: .052 lb/in3 (1.45g/cc)
• Volume Fraction: 55% Fiber, 45% Epoxy
• Fiber Types: Hyosung H2250 12k and Hexcel AS4 3k.
• Epoxy: PRO-SET INF-114, INF-213.
• Glass Transition Temperature Tg Onset: 177°F (81°C)
• Stacking Sequence: These standard carbon fiber plates are made using woven 2x2 twill carbon fiber fabric with fibers oriented at 0 and 90 degrees. All of our panels are symmetric and balanced for superior flatness and predictable mechanical characteristics. Please contact us for specific stacking sequences.
• Panel Length and Width Tolerance: -.06 + .06"
• Thickness Tolerance: 0-.124"THK ±.010", .125"-.375"THK ±.020"

Carbon Fiber Flat Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.