Industrial Composite Carbon Fiber Rods Tubes Used In Medical Apparatus And Instruments

Medical apparatus and instruments used in industry of carbon fiber tube composite .

Introduce

Glass fiber products, carbon fiber products have the following advantages:
1. Light weight, high strength Its specific gravity 1.4 1.5 g/cm, is only a quarter of the steel, transportation

and installation is very convenient, compared with the plastic products, its strength is plastic products of

dozens of times, so light weight, high strength is one of the notable characteristics of carbon fiber rod

composites.
2. Corrosion resistance, anti-aging, long service life Carbon fiber bar to acid, alkali, salt, some organic solvents and other corrosive erosion, in the field of corrosion protection has the incomparable superiority to other metals, and have good water resistance and aging resistance, so no matter in corrosive environment and bad in the open air, wet environment operation, its service life can reach more than

15 years.
3. Good safety, high impact resistance, can design sex is strong, is indispensable to modern industrial and agricultural products one of the new alternative materials.

Because of its unique performance, make the products are widely used in tents, mosquito net, ball bags,

bags, curtain, umbrellas, windsurfing, fitness equipment, whip, shaft, clubs, golf practice nets, and baby

game blanket, advertising display, kites, windmills, fan support, flying saucer, frisbee, aviation model,

circuit board printing equipment of the transmission shaft, etching machine, sports equipment, medical

apparatus and instruments, sea greenhouses stent, etc.Company and can be separately designed

according to customer requirements, products development and production of glass fiber and carbon

fiber products, etc., in order to meet the guest to the specific requirements of the product.

Specification

Application

Epoxy pipe is by electrician non-alkali glass fiber cloth dipped in epoxy resin, after baking, after hot

pressing molding processing of cross section is, round rods of the glass cloth rod has high mechanical

properties.Dielectric properties and good machinability.Suitable for electrical equipment for insulation

structure parts and components, and can be in damp environment and under the condition of transformer

oil.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.