1000Base-T Only SFP Copper Transceiver , with 1Gbps SerDes interface Industrial Temp

Features:

 Hot-pluggable SFP Footprint
 Fully Metallic Enclosure for Low EMI
 Low Power Dissipation
 Compact RJ-45 Connector Assembly
 Detailed Product Information in EEPROM
 +3.3V Single Power Supply
 Access to Physical Layer IC via 2-wire Serial Bus
 10/100/1000 BASE-T Operation in Host Systems with SGMII Interface
 Compliant with SFP MSA
 Compliant with IEEE Std 802.3TM-2002
 Compliant with FCC 47 CFR Part 15, Class B
 Compliant with RoHs.
 Temperature range -40°C to +85°C

Applications:

 1.25 Gigabit Ethernet over Category 5 Cable
 Switch/Route to Switch/Route Link
 High Speed I/O for File Servers

1000Mbps, with 1Gbps SerDes interface, enable the auto-negotiation default, with Tx_disable function,support Rx_LOS as link indication function,unshielded twisted-pair (UTP) Category 5 Cable,Transmission Distance 0.1Km,Temperature -40～85℃

Descriptions:
The Copper SFP Transceiver 10/100/1000Base-T or 1000Base-T only SFP Copper Transceiver is high
performance, cost effective module, compliant with the Gigabit Ethernet and 1000BASE-T standards as
specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mb/s data-rate up to 100 meters
reach over twisted-pair category 5 cable.
The Copper SFP Transceiver supports1000 Mb/s full duplex data-links with 5-level Pulse Amplitude
Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mb/s on each pair.
The Copper SFP Transceiver provides standard serial ID information compliant with SFP MSA, which
can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can
also be accessed via 2-wire serial bus at address ACh. The address of the PHY is 1010110x,where x is
the R/W bit.

Notes:
1. LP-GE2-TAXX auto-negotiation capabilities is SGMII without Clock With SGMII auto-negotiation advertise all capabilities and prefer master to 10/100/1000Mbps copper, 10/100/1000 BASE-T operation requires the host system to have an SGMII interface without clocks. and auto-negotiation advertise all capabilities 10/100/1000Mbps
2. LP-GE1-TAXX auto-negotiation capabilities is SERDES without Clock With SERDES auto-negotiation , advertise only 1000BASE-T full duplex preferred master and 1000BASE-X auto-neg to 1000Mbps copper(GBIC). Only,. With a SERDES that does not support SGMII, the module will operate at 1000BASE-T only.

LINK-PP is a professional designer and Manufacturer of magnetic telecom and networking components. Founded in Shenzhen in 1997 and began to develop Discrete Transformer. With over 26 years of experience in innovation and technology leadership. Our main products include RJ45 Connectors, LAN Transformers, and SFP Modules. We focus on improving product reliability and durability.

Main Production Lines

◆ 10/100/1000/10GBase-T LAN Isolation Transformer and Filter

◆ Rj45 Modular Jack With Integrated 10/100/1000/10G Magnetics
◆ Magnetic Rj45 Jack with POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ LAN Transformer With POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ T1/E1,T3/DS3/E3/STS-1 Interface LAN transformer
◆ ISDN,HDSL,ADSL and VDSL Transformer and splitter

◆ Optical Transceivers