Add to Cart
10G CWDM SFP + 40KM Fiber Optical Transceiver Module With LC
Connector
FIBERROAD's FP-XX96-40 is a very compact 10Gb/s optical transceiver
module for serial optical communication applications at 10Gb/s. The
FP-XX96-40 converts a 10Gb/s serial electrical data stream to
10Gb/s optical output signal and a 10Gb/s optical input signal to
10Gb/s serial electrical data streams. The high speed 10Gb/s
electrical interface is fully compliant with SFI specification.
The high performance 1470~1610nm CWDM EML transmitter and high
sensitivity PIN receiver provide superior performance for Ethernet
applications at up to 40km links.
The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae
10GBASE-ER. Digital diagnostics functions are available via a
2-wire serial interface, as specified in SFF-8472.
The fully SFP compliant form factor provides hot pluggability, easy
optical port upgrades and low EMI emission.
Features
Applications
² 10GBASE-ER/EW Ethernet
² Sonet OC-192/SDH
² 10G Fibre channel
² CWDM Networks
Optical Parameters(TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section | ||||||
Center Wavelength | λc | λ-6.5 | λ+6.5 | nm | ||
spectral width | △λ | 1 | nm | |||
Average Optical Power | Pavg | -1 | +4 | dBm | 1 | |
Laser Off Power | Poff | -30 | dBm | |||
Extinction Ratio | ER | 8.2 | dB | |||
Transmitter Dispersion Penalty | TDP | 3.2 | dB | 2 | ||
Relative Intensity Noise | Rin | -128 | dB/Hz | 3 | ||
Optical Return Loss Tolerance | 20 | dB | ||||
Receiver Section | ||||||
Center Wavelength | λr | 1260 | 1620 | nm | ||
Receiver Sensitivity (OMA) | Sen | -16 | dBm | 4 | ||
Stressed Sensitivity (OMA) | SenST | -14 | dBm | 4 | ||
Los Assert | LOSA | -27 | - | dBm | ||
Los Dessert | LOSD | -17 | dBm | |||
Los Hysteresis | LOSH | 0.5 | dB | |||
Overload | Sat | 0 | dBm | 5 | ||
Receiver Reflectance | Rrx | -12 | dB |
Order Information
In the Part No. of FP-XX96-40, xx stands for central wavelength, such as:
47: for 1470nm, 49: for 1490nm, 41: for 1410nm, ......61: for
1610nm.
We provide OEM/ODM service to our customers,Our price is far lower
than our competitors due to our good material sourcing at lower
cost.
All our fiber transceivers are 100% compatible with major brands like Cisco, Huawei, Extreme, HP, Finisar, Broadcom, Foundry, Alcatel, D-link, Enterasys, Netgear, Juniper, Nortel, Linksys, Allied, Zyxel, Dell, Redback, H3C, ZTE, Ruijie, Ciena , Alcatel-lucent, etc.
We will work hard to fit your minimum quantity orders and also
organized and schedule all shipping to your office.