1 - 10 Results for what is digital signal from 14404 Products
20mA Digital Signal Isolator
20mA Digital Signal Isolator Signal Isolator Current/Voltage Signal 0-5V or 4-20mA Isolator Input Input signal: 4-20mA; 0-20mA Distribution voltage: 24V, (maximum drive current 30mA) Input impedance: ≤50Ω Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Output load resistance: RL≤500Ω (when output is current signal); RL≥10KΩ (when output is voltage signal) Basic parameters Power supply: DC24V, ± 10% Current consumption: ≤50mA (one input and one...
DC 24V Digital Signal Isolator Current Signal Transducer Wireless Antenna Accessories 4-20mA / 0-20mA Input Input Input signal: 4-20mA; 0-20mA Maximum input current: 35mA Distribution voltage: ≥19V Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Maximum output current: 35mA Output load resistance: RL ≤ 550 Ω (when the output is a current signal); RL>330KΩ (when the output is a voltage signal) Note: The user can specify the current output or...
24V DC 2000mW Digital Signal Isolator 8ch RS485 Signal Converter
24V DC 2000mW Digital Signal Isolator 8ch RS485 Signal Converter Signal Converter 8ch Analog Signal Convert to RS485 Analog Data Acuisition Module 1. General Introduction The LS-TD4018 is an industrial grade analog acquisition product that supports measure range with -15mV ~+15mV, -50mV~50mV, -100mV~+100mV, -500mV~+500mV, -1V~+1V, -2V~2V, -20mA~20mA and J type, K, T, E, R, S, B, N type TC signal 8 channels input. It adopts standard MODBUS RTU...
Digital Signal Repeater For Cell Phone / Mobile Phone Range Extender 26dBm
26dBm Digital Mobile Signal Repeater DCS 1800 WCDMA 2100 MHz For Tunnel Descriptions: Digital Repeater is a new kind of RF Repeater that is adopting DSP (Digital Signal Processing) technology basis on FPGA platform, highly linear components and unparalleled innovative DSP filtering provide top level performance. Digital Repeater can be selected as Band Selective or Channel Selective operation mode, which supports up to 12 channels both on uplink...
Shenzhen Sacon Telecom Co., Ltd
Verified Supplier
TaiZhong Industrial Building Ai Lian LongGang District, Shenzhen, Guangdong, China
Resistance Digital Signal Isolator Transducer 0-5KΩ Input To 4-20mA 0-5V Output Converter
Resistance signal transducer 0-5KΩ input to 4-20mA or 0-5V output Input Input signal: resistance signal, resistance range: 0-5KΩ Incentive method: built-in precision constant current source excitation Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Maximum output current: 35mA Output load resistance: RL ≤ 500Ω (when the output is a current signal); RL>10KΩ (when the output is a voltage signal) Note: The user can specify the current output or...
Current Voltago 0-5V 4-20mA LS-TET-AI Digital Signal Isolator
LS-WS1521 Signal Converter Current or Voltage Signal to 4-20mA, 0-5V ● DC24V power supply, input, output, power supply, full isolation, isolation and conversion of industrial field DC voltage signals into standard current and voltage signals ● DIN rail independent installation The main technical parameters Input Input signal: 0-75MV; 0-5V; 0-10V. Input impedance: ≥300 KΩ Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Output load resistance: RL...
2 Channels Digital Signal Isolator Modbus I/O Module Dry Contact Output CE Approval
Signal Isolator Remote I O Module Digital Input Switch Input Dry Contact Output 2ch Input Input signal: switch, proximity switch, frequency ≤ 10Hz Distribution voltage: ≈8V (when open) Short circuit current: ≈8mA Output Relay output Characteristics: Response time: ≤20mS Drive capacity: 2A/250V AC; 2A/30V DC Load type: resistive load Input and output characteristics (when set to in-phase control): The field switch is closed or the input loop...
4-20mA Converter AC Type Current Digital Signal Isolator Perforation Current Transmitter
Input Input current range: AC 0.5-150A Frequency range: 40Hz-60Hz Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Output load resistance: RL ≤ 500Ω (when the output is a current signal); RL ≥ 10KΩ (when the output is a voltage signal) Basic parameters Power supply: DC24V, ±10% or AC85-265V Rated power: ≤1W (one input and one output, DC24V power supply, 20mA output) Basic accuracy: ≤0.5% F.S. Temperature drift: 0.02% F.S./degree (-20 degrees ~...
1 Input 1 Output 0-5V 4-20mA 0.5mS Digital Signal Isolator
TU-IP series analog input distribution isolator, is to provide isolation power for two-wire transmitters and three-wire transmitters on site, and also simultaneously transfer and output the 0/4~20mA signal produced by the transmitter. It needs independent power supply. Its power supply, input and output are separated to each other. Input Input signal: 4-20mA, 0-20mA Maximum Input current: 35mA Distribution voltage: ≥19V DC Output Output signal: 4...