1 - 10 Results for pvc gate valve from 7446 Products
Ductile Iron Non Rising Socket End Gate Valve Resilient Soft Seat
...use in water, waste water, sewage, steam and oil, being coated with epoxy power, the coated is make sure bigger than 250μm. There are PVC Pipe and Cast Iron Pipe. The socket end gate valves all guarantee with zero leakage ( Class A), all valves are 100%...
Chizhou Fuchang Machinery Manufacturing Co.,Ltd
Verified Supplier
Xinhe Industrial Zone, Qingyang County, Anhui Province, China
...Gate Valve Product introduction: Flat gate valve is a sliding valve with a parallel gate as the closing element. The closing component can be a single gate or a double gate with a supporting mechanism between them. The clamping force of the gate towards the valve seat is controlled by the medium pressure acting on the floating gate or floating valve seat. If it is a double gate flat gate...
Shanghai Jianggong Valve Manufacturing Co., Ltd.
Verified Supplier
No. 5089, Nanzhu Road, Zhuqiao Town, Pudong New Area, 201324, P. R. China
Stainless Steel Gate Valve Automatic Open Close Valve Wear Resistance
... (i.e. opening and closing parts, in which the opening and closing parts are called gate plates or gates, and the gate seats are called gate plate seats) to connect (fully open) or Cut off (fully close) the medium in the pipeline. It is not allowed to be...
Building A3, Tianan Smart City, Xinwu District, Wuxi City, Jiangsu Province
Pneumatic Drive Vacuum Gate Valve / Small Noise Manual Gate Valve 1E+5-1E-7 Pa
..., which are applicable for ultrahigh vacuum. The valve utilizes screw (manual and electric) or cylinder rod (pneumatic) drive to push (pull) link mechanism under the axial movement of seal shaft, thus to drive valve spool assembly to do axial movement....
KYKY TECHNOLOGY CO., LTD.
Verified Supplier
No. 13 Zhongguancun Bei er tiao, Haidian District, Beijing,100190
API 600 Cast Steel Gate Valve Class 150-1500 Rising Stem OS&Y Bolted Bonnet
...Gate Valve Class150-1500 Rising Stem OS&Y Rising-stem cast steel gate valves are used when it is important to know by immediate inspection whether the valve is open or closed and when the threads (stem and gate) exposed to the fluid could become damaged by fluid contaminants. In this design, the stem rises out of the gate valve when the valve is opened. The wedge gate of the Kolink gate valve......
Shanghai Kolink Valve Co., Ltd.
Verified Supplier
Room 368, No. 2, Lane 377, Tian Zhu Road, Shanghai, China
Electric Manual Plunger Valve Drain Stop Gate Valve Discharge Valve
...Valve Drain Stop Gate Valve Discharge Valve 1. Description: Valve body diameter of the slot valve has no groove, the medium will not block, and it has the characteristics of full pass. 2. Specification: FABIA Valve Parameter List Valve type: Electric Manual Plunger Valve Drain Stop Gate Valve Discharge Valve Size: 1/2 inch ~ 448 inch Material: WCB,Q235B,2507,A105,CF8(304),CF8M(316),CF3M (316L),CF3(304L),PVC......
Fabia Valve Industry (Suzhou) Co., Ltd.
Verified Supplier
Room 1305, Building 3, Jundi Business Plaza, No.3, Weihua Road, Suzhou Industrial Park
DN500mm Flanged Gate Valve With Manual / Electric Control Valve
...full open and full close to block fluid in the pipeline. The gate is usually wedge shaped. When the valve is wide open, the gate is fully drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe in which the valve is...
Hangzhou Hydrotu Engineering Co.,Ltd.
Verified Supplier
West A - 413, Zhejiang University NATIONAL SCIENCE PARK No. 525 Xixi Road, Hangzhou, Zhejiang Province, China, 310013
Cast Iron Gate Valves For Industrial Chemical Industry
...Gate Valves For Industrial Chemical Industry Gate Valve Overview Cast iron gate valve is a type of valve used to completely open or close the flow of a medium, like water. It is mainly designed for starting or stopping flow, not for flow adjustment. There are two types of cast iron gate valves: wedge gate valves and parallel gate valves. These valves are commonly used in water pipelines. Gate Valve......
Handan Shengnada New Material Technology Co., Ltd.
Verified Supplier
No.4 Building, Wuan industry park, Handan, Hebei, China
Flexible Brass Gate Valve With Plastic Part Ppr Coated Check Valve
...Gate Valve With Plastic Ppr Part Flexible Brass Gate Valve Ppr Coated Gate Valve Check Valve What is a brass gate valve used for,dstherm gate valve? Brass gate valves, are made by brass material, dstherm gate valves in different designs, are opened and closed through the manipulation of a wedge or gate. The valves......
DSTHERM INDUSTRIAL LIMITED
Verified Supplier
Exporting Department 1710 Greenland Technology Center NO.2 Xinjian East Road Shanghai China
Resilient Seated Socket Gate Valve With Spigot End For PE / PVC / DI Pipe
...Gate Valve With Spigot End For PE / PVC / DI Pipe Detailed Product Description Size: DN40 ~ DN 300 Pressure: PN10 , PN 16 Standard: DIN F4 / DIN F5 / BS5163A / AWWA C509 C515 MJ / JIS Temperature: -20 ~ 120 C Body: Ductile Iron GGG40 / GGG 50, Cast Iron GG25, DI Wedge: Iron Coating EPDM / NBR High Light: resilient seat gate valve , flanged gate valve Resilient Seated Gate Valve With Socket / Spigot End For PE / PVC......