tilting disk check valve

... Disc 14 Inch 600Lb WCB ing Disc 350mm Flange ing Disc Item ing Disc Certification ISO9001,ISO1...

Disc Cast Steel Fast Opening Low head Loss disc produce slightly more pressure drop than swing o...

... diameter: DN300-DN1000mm Seat Buffering of the sealing surface is declined against the outlet with small dropping angle to red...

disc , JIS disc vlave, JIS vlave, non-impact vlave, JIS non-impact vlave, non-inrush vlave, s...

Low Noise Type Safety Relief Pressure Regulator Product Overview: Foowell Type has small flow resistance can s...

Disc disc .pdf...

... Swing , Made By Ductile Iron , SS Plate Application: is used for preventing the back-going of medium in pipelines and equipm...

Model No. CV-H-001-1 ductile iron with cylinder hydraulic DAMPER, PN16 . Temperature: -20℃-+120℃ Quick Detail Design standard: BS...

Product Description Tilting Disc Design Available in Both Bolted Cover and Pressure Sealed Design Standards Compliance: ASME B16.34, MSS SP-117 Constr...

..., Wafer Type , Disk Applicable Standards Design Standard: API 6D, API 594, BS1868, API602 Material:DI, CS...

...ough a system opens the , while any reversal of flow will close the . Exact operation will vary depending on the type of mech...

... to prevent medium back-flow in the pipeline network. Automatically eliminates destructive water hammer, ensuring that water pumps and pipelines ar...

... Trim No 8 A , clack , non-return or one-way is a that normally allows fluid (liquid or gas) to flow through it i...

... DIN3202-F6 PN16/PN10 The is a that maintains fluid-flow constantly in a constant direction. It has a function to prev...

... Ductile Iron EPOXY Coated ​ Description: A rubber flapper swing consists of a body, a cover, and a flapper that is co...

... is applied to the horizontal pipelines or the vertical pipelines in which medium flow run supwards,The backwards flowing is effectively...

...the fluid passing through a system opens the ,while any reversal of flow will close the s.Exact operation will vary depending on the type...

...ng the vertical centerline of the body. The internally threaded can only be installed on horizontal pipelines. On high-pressure s...

...a is a swing installation position is not limited, usually installed in the horizontal pipeline, bu...