serial resistor

... EEPROM, USB termination , and an integrated clock circuit that does not require an external crystal within the device, simplifying USB to...

... Mbps • Supports 8-bit wide parallel data • Single 3.3V power supply • Integrated termination • Operating temperature: -40°C to +85°C • R...

...TERMINATING Description Model X20CS1070 Brand B&R DataSheet/Catalogue In PDF File Weight 0.05 KG Condition Normal Description CAN bus inte...

AT24C256 EEPROM I2C Interface EEPROM Data Storage Module Description 1. Onboard 8P chip mount, install AT24C256 chip; 2. Piston power supply, o...

8-Bit Microcontroller with 8K Bytes Flash AT89C52-24JI Features • Compatible with MCS-51™ Products • Fully Static Operation: 0 Hz to 24 MHz • 8K Bytes...

...text, graphics, number, number, number, 2D barcode, etc. can be made on various materials. Application: 1). Jewelry & Acessori...

3M468MP Rubber Membrane Switch Keyboard with Poly Dome Female, Male Connector Available membrane switch keypad is made of PET, PC, rear adhesive is 3M...

..., 12 bit, , 2.7V to 5.5V, SOIC, 14 pins 2. Microchip McP4922-e /SL dual 12-bit DAC, (SPI/Microwire) interface, 14-pin SOIC package 3. ...

...inputs with internal pull-up , meaning they will read HIGH when not pressed and LOW when pressed. Output: When a button is pressed,...

... display 2 compatible with parallel//RGB data interface 0.5 mm spacing. Can be supplied with or capacitor touch. 3 has a wide angle ...

... data to an internal register. The constant-current value of all 16 channels is set by a single external . Application: • LED Video Display...

... interfacesto the M1 controller. 4 interfaces on one module Any number of interfaces possible per controller RS232/Rs422/RS485 can be combine...

... • RS232/RS422/RS485 can be combined • High speed interfaces with up to 1.5 Mbaud • Auto-flow control for automatic handshake • Integrated terminat...

... in applications that have UART and/or I2C interfaces. MCP2221A-I/P device reduces external components by integrating the USB termination ...

... 2.0 standard test conditions Generally test at 25±2℃, 65%RH 2.1 PTC zero power (Rn) After the test sample is placed in still air at 25±2°C...

...Integrated terminating In addition to the standard I/O, complex devices often need to be connected. The X20CS communication modules are in...

...With anti-voltage fluctuation function • Level Hold, optional High effective or low effective • NMOS output built-in pull-up /CMOS direct o...

...SSHM-T Chip SOIC-8 Storage Device AT24C02D-SS AT24C02D AT24C02 AT24C / 02DM SOIC-8 2Kbit Our goods: Active components (IC integrated circuit...