pendulum test

... of barbell weight 210mm Material steel Procedure The apparatus consists of a 4,5 kg barbell weight at the top of a freely pivoting b...

... load. The principle machine of the machine has single supporting column structure, cantilever type hanging mode; the bod...

... of Household and similar use of plug socket, some electrical accessories like switch and shroud etc. The apparatus consists basically of a pe...

... device To verify IK10 resistance, one impact of 5kg mass dropped from 400mm above the affected surface is necessary. “The Standard E...

... Equipment Tempered Glass Impact ing Machine Toughened Glass Impact er Machine Model: B8120R Application: Shot Bag Impact Appa...

... Eha: hammer, IEC62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK c...

... Impact Device Complied Standards & Clauses for Electric Vehicle Charging Interface Impact Device This Electric Vehicle ...

... materials with high toughness, especially for steel and iron and their alloy, under dynamic load. This machine can be operated semi-automatically....

... (equivalent EN62262), and can meet the requirements of IEC60598, EN50102, the equipment is mainly consisted by rig, swing rod and striki...

... Machine V Notch Impact T3803 2002 impact machine Performance description: Impact machine is used to determine the ...

... and comparability of data, comparable to imported similar products ◆ two methods can be switched: K (Konig) or P (pers...

... Hammer Apparatus IEC62262 IEC60068 Ehc Parameters: Standard IEC60068-2-75 Environmental –Part 2: s – Eh: Hammer...

... Impact Apparatus for EV Charging Interface Product Information For Impact Apparatus: Comply with standard EN IEC 61851-...

... Charpy Impact Equipment/Metal Impact Tester is used for measuring the metal material resistance performance under dynamic load, in...

..., nylon, glass fiber reinforced plastic, ceramics, cast stone, insulation materials as well as other non-metallic materials. It is a common quality...

IEC 62262 IK Pendulum hammer,IK Rating Test, Pendulum Impact Hammer 1.IK Testing for LED luminaires 2.IEC 62262:2002 3.IK code IK01-IK10 4.To test deg...

... 5 Eha: hammer and Annex D; IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' ...

... of ferrous metal materials with high toughness, especially for steel and iron and their alloy, under dynamic load. This machine can be operated se...

...standard of GB1444-2008 clause 5.3 and Figure 4, it is used for impact resistance of the lamp holder insulating shell. The apparatus cons...