manual slide gate valve

/Pneumatic/Electric Damper Product description This damper has the characteristics of simple design, light we...

... Electric Power Planning and Design Institute and Central South Electric Power Design Institute.The door is driven by electric (pneumatic, ) ...

..., which are applicable for ultrahigh vacuum. The utilizes screw ( and electric) or cylinder rod (pneumatic) drive to push (pull) link m...

... C515 MJ / JIS Body: Cast Iron GG25, DI Wedge: EPDM Rubber High Light: resilient seat , flanged EPDM Rubber Resilient Seated ...

... to surrounding.This is very suitable to contaminated/hazardous media for the safety of surrounding. Feature This type of knife val...

... DIN 3352 Flat GS C25 28 Inch DN700 PN100 Flat API 6D Parallel Name: Flat Model: Gate V...

...full close to block fluid in the pipeline. The is usually wedge shaped. When the is wide open, the is fully drawn up into the ...

..., Hydraulic , Check , Choke , Plug and Mud Manual Gate Valve A is a type o...

... Flanged Product introduction: is a like a , with the movement direction perpendicular to the direction of the flui...

... Flanged Flat Product Introduction Our products meet the requirements of advanced domestic and international standards, with reli...

..., carbon steel valve2. Pressure: PN16, PN25, PN40, PN64, PN100 3. Material: cast steel, stainless steel 4. Operation: handwheel, gear ......

... and is an ideal choice to ensure the stable operation of various water systems. Product Highlights High - quality Material: The body is made...

...) Pressure of flat : 150LB(PN10)-1500LB(PN250) Connection type: Flange(RF,EM,RTJ),SW,BW. Kind of drive: Wrench,Gear,Pneumatic and electri...

... flow regulation. Because of their ability to cut through liquids, are often used in the petroleum industry. Quick Details: 1. Type: Ga...

... available in pressure ratings from 2,000 to 20,000 psi and bore sizes from 1 13/16 to 11 in. The FLS is our standard for critical requiremen...

...6A For Wellhead High Pressure Flow Control The are designed and manufactured according to API 6A Specification, with ...

...Stem is a unidirectional wafer knife edge used on industrial pipeline for on-off operation. The structure of body and seat el...

Manufacturing standards: API, ANSI, BS, DIN, JIS Size range: from 1/2 to 36 inches (DN15mm - DN900mm) Pressure: from ANSI class ...

Item Horizontal Style Bronze Swing Check Crane Bronze Material CC491K CC499K C89836 C89844 etc... Dimension 1/2", 3/4", 1", ...