lined pipe fittings

... Fusion Bonded Epoxy (FBE) Super Anticorrosion Powder Coatings Introduction: This series of products is one kind of thermoset p...

...: Groove Split flange Application: system Application specification: DN60--DN426 Product surface: epoxy spraying Features: High pressure res...

... is a common phenomenon, which mainly occurs in elbows, tees, and other parts. The elbow wears more than the straight ....

... / Poly Tube Shock Absorption 1. Polypropylene & polyethylene raw materials comes from the world 500 strong China petro...

PFA lined pipe with tri-clamp fitting Fitting standard: 3A. FEP or PTFE liners are available. Virgin and anti-static liners are available. Remark: Can...

... provided if necessary to adjust automatically the center elevation of the elbow, so as to bevel the elbows with different diameter On- perform...

carbon steel galanized zinc plated coating brake hose Product Description Product Description QDGY No. M10x1,M10x1.25,M11x1.25M12x1...

... Ball valve Butterfly valve check valve stop valve Fluorine for Acid Chemical Tank Ball valve Butterfly valve check valve ...

... is generally 95% ceramic, and the temperature is generally below 200°C. The features of Weldable ceramic tile are as follows: good abra...

Ningbo Diya Industrial Equipment Co., LTD. is located in Zhejiang, China,we are also through the ISO9001 certified enterprises. From 2014, we focus on...

... , I-, butt welded , beveal seat , Q-. We provides the elbows as followings detail...

...lengths are around 100mm depending upon nominal bore and the longest lengths is 6 meters for up to DN150 and 3 meters above this. Generally constru...

...​ Product Description: carbon steel elbow is belongs to one type of which is used into the gas , oil for base ...

...piece of with a lateral outlet. Tee is used to connect lines with a at a right angle with the Tees are widely used as...

... PE/steel transition joint Company Information Established in 1999, Jiang Te Polytron Technologies Inc is a producer of H...

.... It is available in size 1/2 and manufactured according to ASTM A312, ASTM A403, ASTM A815 standards. It is used to create a cross-connection in t...

Welding ASTM B366 Alloy Steel Eccentric Reducer Connectors Product Description Name Reducer Concentric /Eccentric Reducers, C...

... in the mouth and is fixedly connected with the inner wall of the wide mouth. The other part of the is located outside the mouth. ...

... connection, plug, street elbow, Elbow and cross etc. Our brass all meet specifications and standards of ASA, ASME and SAE. ...