iron gate valve

... is an essential component in various industrial applications, including HVAC systems and wastewater management. This versatile valv...

... :Ductile /Cast +Metal seal ring SEAT ON BODY: Brass/Bronze/Stainless steel STEM: SS420/SS410 BOLT AND NUT : CARBON ......

... / Mueller Resilient Wedge Detailed Product Description Name: Ductile Pressure: PN10 / PN16 Temperature: ...

... For Industrial Chemical Industry Overview Cast is a type of used to completely open or close the ...

...Seal Product description The is a device that realizes the on-off control of pipeline media through the lifting movement of the cl...

... For Industrial Chemical Industry Overview Cast is a type of used to completely open or close the ...

... to Face:DIN3202 F5 3.Flange Standard:EN 1092 4.Testing Standard:EN12226 cast Main Material of parts: 1.Body:GGG45/GGG50 2.Bonnet:G...

... / Mueller Resilient Wedge General information Rubber-coated shut-off wedge with sliding caps to reduce wear and tear and...

...coated by fusion bonded epoxy both on the interior and the exterior surfaces of the , flange surfaces are also fully epoxy coated. The minimum...

Free sample female thread resilient seated cast Material Free sample female thread resilient seated cast Size 1/2", 3/...

... With PN10 PN16 PN25 Model No. GV-Z-7 ductile DIN PN16 Flat resilient for drinking Water. Temperatur...

2 inch Handwheel ANSI 125/150 Non-rising stem Resilient Soft seated Cast For Water Features of Rising-stem Wedge : Bolted ...

Pressure Seal Cast , Ductile Flanged Ends Size NPS 2″~24″ Pressure Rating Class 600~2500 Material WCB,WCC,WC6,WC9,......

... Nonrising Stem Wedge Z945T/W Electric Cast Product Performance Specification: Model PN Work Pressure/MPa Applicable...

... characteristics. It has the advantage of extremely low drag when fully open. is used in all types of industrial facilities, including h...

... Copper Core Seal Flanged Introduction The opening and closing part of the is the . The movement direction of the gat...

...B16.1 (1251b) 3. Face to Face dimensions Conform to ANSI B16.10 (1251b) 4. Rubber material may be also CR EPDM etc. 5. All surfaces shall be ...

...DS / Z44H cast steel, cast seal GB1.6Mpa, GB4.0Mpa, GB6.4Mpa Name : DS/Z44H cast steel seal Model: DS/Z44H Caliber: 50～6...

...packing, adjust the preload and preload gap; if the cannot be closed, the mechanical plugging method or adhesive plugging method or injection...