hot tack tester

...ASTM F2029 and other standards. This advanced testing equipment performs multiple test types including testing, heat seal testing, heat se...

... With Touchscreen Interface and Safety Features Introduction The heat sealing is designed to measure critical parameters incl...

... surfaces immediately after the seal has been made and before it cools to room temperature. is especially important for vertical fo...

Computer Type Loop / Tape Adhesion / Initial Adhesion / PSTC - 16 Standard FINAT(FINAT test method No. 9: loop measurement), P...

Tape Primary Computer Control Loop Tester Less Than 1% Error Introduction: It is used to do the loop test of kinds of adhesive,tape,can...

... Rolling Ball CNS11888 Adhesion Test Definition of primary : Initial : the adhesion of the adhesive tape to an object when the ...

... 1. Test principle PSTC 6 Rolling Ball adopted the inclined plane rolling ball method and the inclined groove rolling ball method of me...

BN-IV-50T Digital display Ink viscosity meter (Automatic inkometer, ink tack tester) mainly adopts the highest configuration of modern intelligent ind...

Professional Adhesion Tape Rolling Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact b...

... wire complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow W...

ZRS-2 wire Scope of application The heating wire heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm ni...

... within the device may be ignited by a wire or a element. Under certain conditions, such as the failure current, component overload, and ad...

... within the device may be ignited by a wire or a element. Under certain conditions, such as the failure current, component overload, and ad...

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision ad...

Loop Tack Testing Machine Primary Adhesion Tester Descripition: The loop tack tester is mainly used for the initial adhesion of various kinds of tapes...

... Melt PSA For Gloss Or Semi Gloss Paper Labels Paper Labeling This is a synthetic rubber based melt adhesive specifically developed for...

... modified melt. Apply it onto PET, PVC, or PEI. At room temperature, it has zero initial . Under pressing, it bonds strongly to itself....

Z140A-1 Soft Melt PSA for Mattress Fabric Assembly, Excellent Initial Z140A-1 Soft Melt PSA for Mattress Fabric Assembly, Excellent Initi...

... melt adhesives are a successor of traditional thermoplastic melt adhesives, mostly based on EVA and Polyolefin polymers. As with tradition...

...footwear liquid melt adhesive in Indonesia and Vietnam, offering a soft bond that resists cracking. Application: Leather bags, shoes, SPC floor...