heat element wire

...heaters spiral elements wire Resistance tempered glass furnace Electric furnace heater spiral elements wire Re...

... Round Shape 0.08mm, FeCr25Al5, 0Cr25Al5 FeCrAl alloys are characterized by excellent oxidation resistance and very good form s...

NF20 PTC Ni-Fe Alloy High Temperature Heating Element Wire Nickel Plated Resistivity 0.20 The product exhibits a resistivity of 0.20 at a temperature ...

... electrical applications. It is made up of 80% nickel and 20% chromium, which gives it high electrical resistance and excellent oxidation resistanc...

UL certificate 450C mica insulated wire UL5335 for heating element Specification: Rated voltage: 600V Rated temperature: 450C UL standard: UL758 Appli...

... for High Temperature Furnace 0Cr27Al7Mo is a iron-chromium-aluminium alloy (FeCrAl alloy) characterized by high resistanc...

... ductility after use and excellent weldability. Ni35Cr20 is used for a wide range of electric in domestic appliances. Typical appl...

... coils radiator heaters elements used one Tamglass brand Glass tempering furnace / Heaters for glass temp...

... 50W AC DC 12V consistant temperature ceramic Thermostatic PTC s: 1. Working Voltage rang: 12-240V AC/DC or customize...

...,Liquid air PTC Prodcut Name: PTC Temperature: 50/100/180 degrees Wattage:2-3W/4-8W/6-10W Shell Mate...

... 12V Pad Silicone Rubber Heaters are available as wound or etched foil. wound consist of the resistance w...

... 240V PTC Heater Full Clad and Product description Unlike traditional that use a resistance such as Nic...

... output of Nichrome , 2. High strength and excellent shock resistance, 3. source is free of noise and air pollution. Types and Application...

...High Ohm NiGr alloy .and then winded with stainless steel fin. Finned er tube is more exchange efficient than common electric ing...

... for Chemical Industry or Trace is to be designed based on selection of mineral insulated cable which is prefab...

... Mesh Primarily Used in Electrical Resistance FeCrAl Alloy is a ferritic iron-chromium-aluminium (FeCrAl) based alloy, that ha...

...co-fired at a high temperature of about 1650℃, and then welded with lead . It becomes a of medium and low temperature. This ki...

... ENAMELED MAGNET FOR This is litz with one or more layers of extruded jacket. The has all the properties of Li...

... it also possesses the features of oxidation resistance and high electrical resistivity. FeCrAl alloy mesh can be used for the equipme...