flexural testing machine for concrete

... For Masonary Units/Blocks Equipment Standards: EN, BS, ASTM, AASHTO Description: The hydraulic power source is us...

1. Introduction Used in 180 degrees bending test and check whether there is crack after test in bending plastic deformation for plain round bar, ribbe...

... not only can the cement mortar compression and bending strength, it also can the bending strength of . it’s contr...

... for paper face gypsum board, decorative gypsum board, fibre gypsum board, anchor point plasterboard,hollow gypsum board lath, sound-absorbin...

... wire,nylon wire,plastic,rubber,textile and clothes,packaging etc,for tension,compression and bending,peel and tear . Meet Standards: ISO 7500-...

... for Shoes , Rubber Product overview: ZL-7011 Vertical low-temperature is a which adopt vertical de...

... 10KN Tensile Press Tester 4 Points Bending Introduction : AC Servo Motor 3 Points Bending ...

PSK-500 Digital-display Specimen Ceramic Blank Tester 1.Description: This instrument is suitable for measuring the d...

... Product model number: IF703 Application: This equipment is used for compression of a variety of materials, such as: compres...

... (Manual Lead Screw/Electronic Lead Screw) Application: It is mainly used for compression strength of the . The cont...

Outsole Belt BendingTesting Machine/Footwaer flexing fatigue testing Equipmnet( GW-004) •Brief introduction: This machine proves one of the best indic...

... the compressive strength within the scope of 20-60 Mpa, and the system power is 2.207J.it is medium analogue display. This cement hardnes...

... Testeris mainly used for brick, stone, cement, and other building materials, compressive strength . Hydraulic System: The hydraulic oil tank d...

... Compressive Cube Product Description 1. Application: This Series is mainly used for...

... Compression Product Description It is mainly used for compression strength for building materials, such as brick, cem...

... engineering material of wood material, metal support and building materials, such as brick, cement, specimen and component, etc. Equipped...

... Cement Anti-Bending Product profile RC-TM-019 mainly uses the compressive and strength of cement. It can complete ...

..., /bending and shearing for specimens. Suitable for metal and nonmetal material, such as iron, steel, steel bar, rebar, cement, , ro...

.... It is mainly used to execute the tension, compression, bending, etc. for metal materials. Attached with simple accessories and devi...