flattener stainless steel

... coil strip cold plate hot plate ISO certified metal coil 0.01-20mm thickness uncoiling service Product De...

Expanded Metal Sheet Expanded Metal Mesh expanded metal sheet is metal that has been cold flattene...

... mm 50 mm To 6000 mm long A-479 Note :- (SS) in Grade :- 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, ...

... mm 50 mm To 6000 mm long A-479 Note :- (SS) in Grade :- 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, ...

SS316 Expanded Metal 6000mm 3mm Sheet The two most commonly used types of nowadays are 30431...

Large Diameter Tube Hairline Finish Spiral Welded Tube Cold Drawn SS201 Product Description: Spiral-welded tube is manufactured from c...

... Sch40 Pipe Product Decription: Inspection & Test 1. 100% PMI, Spectro Chemical Analysis Test for Raw Material 2. 100% Dimension & V...

...: Test: One test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from e...

... flat sheets of various sizes. Currently, 304 is the most economical product, and the 304 coi...

Sheet 410 BS EN 1.4006 Hot Rolled Plate HR Sheet Hot Rolled Plate is a piece of hot rolled that is thicker than ...

SS316 Expanded Metal 6000mm 3mm Sheet The two most commonly used types of nowadays are 30431...

... Flat Sheet GB DIN EN 3-120mm 1000mm-6000mm AISI 304 (UNS S30400) is the most commonly used material in stainless st...

... Welded Pipe 304 304 Sanitary Pipe ASTM A554 Description: For the to withstand the pressure to the hydraulic t...

... straightening, leveling and other finishing lines, it is then cut or recoiled to become: hot-rolled plate, hot-rolled st...

... used type among all material knitted meshes. then into a continuous length and rolled up for shipping. The knitted mesh ...

... crimped woven wire mesh.woven 2 mesh 11 mm aperture Woven mesh is used for a large number of applications, includin...

... plates through equipment. The thickness of this type is 0.3mm to 16 mm. Upon delivery, the thickness ranges from 8 mm to 280 mm. Length...

201 304 316 316L 409 Cold Rolled Super Duplex Plate There are two types of plates in thickness. One is...

pipe spherical tank bottom head elliptical bottom dished head of storage tank PRODUCT DETELS pipe spherical tank botto...

... Knitted Wire Mesh Monofilament And Multifilament Wire Knitted Wire Mesh Introduction Knitted Wire Mesh is produced ...