extrusion ratio

... tank tubes, with carefully selected high quality remelted aluminium rods as the raw material. Large tonnage extruder and advanced techno...

High Extrusion Ratio Anodizing Production Line for 2.5kg/m sup2 Aluminum 一.Production Description 1.Immerse the cleaned and acid etched aluminum produ...

... and output. This machine is built with a 40:1 screw L/D and a 380V/50Hz voltage capacity. It is also equipped with a PLC control system for ...

... drawing,or as per custom design Max Aspect ( Fin Height / Fin Gap) More than 20 times aspect heatsink can be extruded by 800 tons--6000...

... Line Wire Making Machinery Machine technical feature 1. Concentricity: 93-97% OD tolerance: Solid +/-0.005 2. Wire specification: Φ1.5mm-...

... LINES WITH VACUUM CALIBRATION SLEEVES Product Application: SJ series single screw extruder, is suitable for PP, PE and other thermoplasti...

... LINES WITH VACUUM CALIBRATION SLEEVES Product Application: SJ series single screw extruder, is suitable for PP, PE and other thermoplasti...

... is electrical set, adjustable according to different types of yarns, to ensure the optimum winding ,realization bobbin unwinding with f...

... machine Application: Single-screw extruder can be applied to the processing of thermoplastic pipes, plates, sheets, bars, profiles and pl...

... dies? Die drool and other die flow irregularities are most often caused by internal die surfaces that are scratched or pitted, or that ha...

... Machine For PVC Plastic Wire Dia 0.6-4mm Quick detail: A Low smoking, non-halogen extruder line B Photovoltaic extruder line Sp...

... pvc pipe machine/production line Main Features: Specified screw design for better material plasticizing&mixing effect and lower cost for...

Basic parameters Model DSB80-30L DSB100II-30L Suitable material PE.PP,PVC,PS,PETG,etc. Max volume 30L Output capacity Around 50 PCS/H 80-100PCS/H Size...

... Equipment With Siemens Use The unit is suitable for sheathing wire and cable by hot of thermoplastic cable materials such as po...

... for extruder; Screw: 38CrMoAl, φ50mm, aspect 25:1; Screw barrel: 38CrMoAl; Screw speed: 10-110rmin; volume: 70kg/h (open head, sof...

Product Description Product Name Standard extruded aluminum heat sink 150(W)*45(H)mm Material AL 6063 T5 Detailed Size As the below drawing,or as per ...

... line Application: it's used for the insulation of wire&cable with PVC,LDPE,NYLON,TPU. Also it can be equipmented with triple co-...

... : 33:1 Screw material: 38CrMoALA Rewinding width: 1600mm : 100-150KG/H Machine speed: 30-100m/min Working voltage: 380V/50HZ/3 Appli...

... shapes and profiles. This process is commonly used in the production of aircraft parts and marine equipment due to the unique properties of magnes...

... Production Machine Line INTRODUCTION Sheet Thicknes: 0.5-2mm Sheet Width: 2000-4000mm according to customers' requirements. Extruder ...