drop in check valve

...

... Cock is divided into UPPER Kelly Cock and Lower Kelly Cock . Upper Kelly Cock connects to the top of Kelly .upper Kelly Coc...

Product Description: The Drilling Handling Tools product offers a comprehensive solution for enhancing the efficiency and safety of drilling operation...

... For Sludge Pump / Low Pressure Detailed Product Description Product Name: Ball Application: Sewage, Water...

... for Pipeline with Stainless Steel Material Nozzle was designed to provide the three mandatory requirements of a check...

... produce the lowest pressure , when compared with other of the same size. They feature a simple design that is easy to maint...

... or vertical (flow up) pipe runs. Inherently, swing have a low pressure and are best suitable for velocity applications. Our clos...

... is in a straight line through the resulting in minimal pressure . The disc swings into the open position as the media flows through the ...

... , 2 Inch Two Piece Construction Prevent backflow of processing media with sanitary Y-Ball When liquid flows thr...

... horizontal 6 inch Advantages of 1. Protection of pumps and compressor equipment from damage caused by backflow/reverse flow...

...n there is inlet pressure, and automatically closes when the pressure or reverses, preventing backflow. The “duckbill” shape ensures reliable...

... diameter: DN300-DN1000mm Tilting Seat Buffering of the sealing surface is declined against the outlet with small angle to red...

.../Safety Relief with high pressure for Inline Pressure Relief s - safety relief are often used in the oilfield wh...

... Description: The RDCS is a slow closing with hydraulic cushion. The bottom of the body is equipped with micro-resistance sl...

Y Pattern Stainless Steel F304 1 Inch Dn25 2500Lb Piston PSC High Pressure Features and benefits DESIGN FEATURES: ...

... rate: 30L/Min, see performance chart Internal leakage rate: at 250 bar (3625 psi), maximum 0.1ml/min (2 /min) Definition of opening pressure:...

Ductile Iron Sliding Ball With Epoxy Powder Coating Description: Technical Parameters Model PN(MPa) Casting test pressure(MPa) Seal test ....