crest factor ups

Fluke 368 368FC 369 FC Digital Clamp Meter Multimeter Types Leakage Current Clamp Meter Product Description Reduce downtime – Find leakage currents wi...

...100-500 Hz) (50 Hz/60 Hz) 3 @ 500 A 2.5 @ 600 A Add 2% for C.F. >2 AC Current via Flexible Current Probe Range 2500 A Resolution 0.1 A...

... (50 Hz/60 Hz) 3 @ 500 A 2.5 @ 600 A Add 2% for C.F. >2 AC Current via Flexible Current Probe Range 2500 A Resolution 0.1 A (≤ 600 A) 1...

... loads that can simulate load conditions under high and varying power with real-time compensation even when the voltage wavef...

... 1.0 Frequency range 46-54Hz same as AC(AC mode) Voltage 220V:176~276Vac 220V:304~478Vac OUTPUT Output voltage 220V:220v±2%Vac Frequency 50~6...

APM810 Multifunction Meter ● True RMS Measurements ● THD with 63rd Harmonics ● K- and ● Unbalance & Phase Angles ● Demands and Mult...

... ≥0.99% @100% Load Output Voltage 200/208/220/230/240VAC Voltage Range(BATT. Mode) ±1% Frequency Range(Sync Correction Range) 47~53Hz or 57-6...

...-200KVA Model:CNG330 10-200KVA(3Ph/3Ph) Nominal Input Voltage: 380/400/415VAC Output Power :0.8 (Ipeak / Irms): 3:1 Rated freque...

...Frequency:47~63 HZ Power :>0.99 Output Power:1000W Efficiency(Max):≥91% THD:<10% Lamp:MH/HPS Strike Voltage:>3.5kv Current :<1.7 Lamp Voltage:200~250V Open Circuit Protection:Yes Short Circuit Protection:Yes Ignition Failure Protection:......

..., multi-mode and multi-carrier, greatly reducing the number of base stations. Multiple high-efficiency power amplifier technologies such as Crest F...

... 3.5:1 • Fast response, suitable for special load. Low Distortion Interference,Complete Input/Output Isolation. • Terminal voltage fee...

... units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest fa...

...: 1012 Ω Low input bias current: 25 pA maximum High accuracy: ±0.2 mV ± 0.3% of reading RMS conversion with signal up to 5 Wide power...

... test: Rated output: 5KV / 12mA 3, the output frequency: 60 / 50Hz (optional) 4, the output waveform: sine wave distortion <2%, the of 1.3 to 1.5 5, Upper limit setting: Range: 0.10 ~ 12.00mA, Resolution: 0.01mA, Accuracy: ± (2%...

... or superior to that of hybrid or modular unitscosting much more. The AD536A directly computes the truerms value of any complex input waveform cont...

...: 1012 Ω Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal up to 5 Wide power...

RF IC Reduction Processor Cellular, CDMA2000, W-CDMA 2 Channels 256-BGA (17x17)...